- 您现在的位置：买卖IC网 > PDF目录17104 > DC1111A (Linear Technology)BOARD DAC LTC2753-16 PDF资料下载
参数资料
| 型号： | DC1111A |
| 厂商： | Linear Technology |
| 文件页数： | 2/24页 |
| 文件大小： | 0K |
| 描述： | BOARD DAC LTC2753-16 |
| 软件下载： | QuikEval System |
| 设计资源： | DC1111A Design File DC1111A Schematic |
| 标准包装： | 1 |
| 系列： | QuikEval™, SoftSpan™ |
| DAC 的数量： | 2 |
| 位数： | 16 |
| 数据接口： | 并联 |
| 设置时间： | 2µs |
| DAC 型： | 电流 |
| 工作温度： | 0°C ~ 70°C |
| 已供物品： | 板 |
| 已用 IC / 零件： | LTC2753-16 |
| 相关产品： | DC590B-ND - BOARD DEMO USB SERIAL CONTROLLER LTC2753BIUK-16#TRPBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753BIUK-16#PBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753BCUK-16#TRPBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753BCUK-16#PBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753AIUK-16#TRPBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753AIUK-16#PBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753ACUK-16#TRPBF-ND - IC DAC 16BIT DUAL 48-QFN LTC2753ACUK-16#PBF-ND - IC DAC 16BIT DUAL 48-QFN |
LTC2753
10
2753f
PIN FUNCTIONS
RCOM (Pin 1): Center Tap Point for the Reference Inverting
Resistors. The 20k reference inverting resistors R1 and R2
are connected internally from RIN to RCOM and from RCOM
to REFA, respectively (see Block Diagram). For normal
operation tie RCOM to the negative input of the external
reference inverting amplier (see Typical Applications).
RIN (Pin 2): Input Resistor R1 of the Reference Inverting
Resistors. The 20k resistor R1 is connected internally from
RIN to RCOM. For normal operation tie RIN to the external
reference voltage VREF. Typically 5V; accepts up to ±15V.
S2 (Pin 3): Span I/O Bit 2. Pins S0, S1 and S2 are used
to program and to read back the output ranges of the
DACs.
IOUT2A (Pin 4): DAC A Current Output Complement. Tie
IOUT2A to ground.
GND (Pin 5): Shield Ground, provides necessary shielding
for IOUT2A. Tie to ground.
D3-D11 (Pins 6-14): LTC2753-12 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D11 is the MSB.
D5-D13 (Pins 6-14): LTC2753-14 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D13 is the MSB.
D7-D15 (Pins 6-14): LTC2753-16 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D15 is the MSB.
VDD (Pin 15): Positive Supply Input 2.7V ≤ VDD ≤ 5.5V.
Requires a 0.1μF bypass capacitor to GND.
NC (Pin 16): No Internal Connection.
A1 (Pin 17): DAC Address Bit 1. See Table 3.
A0 (Pin 18): DAC Address Bit 0. See Table 3.
GND (Pin 19): Ground. Tie to ground.
CLR (Pin 20): Asynchronous Clear. When CLR is taken
to a logic low, the data registers are reset to the zero-volt
code for the present output range (VOUT = 0V).
MSPAN (Pin 21): Manual Span Control Pin. MSPAN is used
to congure the LTC2753 for operation in a single, xed
output range. When congured for single-span operation,
the output range is set via hardware pin strapping. The
input and DAC registers of the span I/O port are transparent
and do not respond to write or update commands.
To congure the part for single-span use, tie MSPAN directly
to VDD. If MSPAN is instead connected to GND (SoftSpan
conguration), the output ranges are set and veried by
using write, update and read operations. See Manual Span
Conguration in the Operation section. MSPAN must be
connected either directly to GND (SoftSpan conguration)
or VDD (single-span conguration).
D0-D2 (Pins 22-24): LTC2753-12 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D4 (Pins 22-26): LTC2753-14 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
D0-D6 (Pins 22-28): LTC2753-16 Only. DAC Input/Output
Data Bits. These I/O pins set and read back the DAC code.
D0 is the LSB.
NC (Pins 25-30): LTC2753-12 Only. No Internal Connection.
NC (Pins 27-30): LTC2753-14 Only. No Internal Connection.
NC (Pins 29, 30): LTC2753-16 Only. No Internal Con-
nection.
GND (Pin 31): Shield Ground, provides necessary shielding
for IOUT2B. Tie to ground.
IOUT2B (Pin 32): DAC B Current Output Complement. Tie
IOUT2B to ground.
S0 (Pin 33): Span I/O Bit 0. Pins S0, S1 and S2 are used to
program and to read back the output range of the DACs.
D/S (Pin 34): Data/Span Select. This pin is used to select
the data I/O pins or the span I/O pins (D0 to D15 or S0
to S2, respectively), along with their respective dedicated
registers, for write or read operations. Update operations
ignore D/S, since all updates affect both data and span
registers. For single-span operation, tie D/S to ground.
READ (Pin 35): Read Pin. When READ is asserted high,
the data I/O pins (D0-D15) or span I/O pins (S0-S2)
相关PDF资料 |
PDF描述 |
|---|---|
| ADZS-BF527-MPSKIT | BOARD EVAL MEDIA PLAYER BF527 |
| ADZS-BF533-MMSKIT | KIT STARTER MULTIMEDIA BF533 |
| 0210390964 | CABLE JUMPER 1MM .030M 27POS |
| HMM06DRKI-S13 | CONN EDGECARD 12POS .156 EXTEND |
| GSM06DRKF-S13 | CONN EDGECARD 12POS .156 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DC1111C | 制造商:未知厂家 制造商全称:未知厂家 功能描述:D_1111C Series, Ultra Compact InGaN/SiC SMT LED |
| DC1111C-TR | 功能描述:LED BLUISH-GREEN 0603 SMD RoHS:是 类别:光电元件 >> LED - 1111C 标准包装:500 系列:Screenmaster® 颜色:琥珀 Millicandela 等级:2260mcd 正向电压:2.1V 电流 - 测试:20mA 波长 - 主:590nm 波长 - 峰值:- 视角:- 透镜类型:散射，有色 透镜样式/尺寸:圆顶椭圆，5.1mm x 3.7mm 封装/外壳:径向 尺寸/尺寸:- 高度:7.00mm 安装类型:通孔 包装:散装 在特定电流下的光通量 - 测试:- |
| DC1-1-12/12 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DC1-1-12/15 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Analog IC |
| DC1-1-12/5 | 制造商:SL POWER ELECTRONICS INC.- AULT 功能描述:Module DC-DC 1-OUT 5V 0.1A 1W 12-Pin |
发布紧急采购，3分钟左右您将得到回复。