- 您现在的位置：买卖IC网 > PDF目录11279 > DEHR33F821KN3A (Murata Electronics North America)CAP CER 820PF 3.15KV 10% RADIAL PDF资料下载
参数资料
| 型号： | DEHR33F821KN3A |
| 厂商： | Murata Electronics North America |
| 文件页数： | 17/84页 |
| 文件大小： | 0K |
| 描述： | CAP CER 820PF 3.15KV 10% RADIAL |
| 标准包装： | 2,700 |
| 系列： | DEH |
| 电容： | 820pF |
| 电压 - 额定： | 3150V（3.15kV） |
| 容差： | ±10% |
| 温度系数： | R |
| 安装类型： | 通孔 |
| 工作温度： | -25°C ~ 125°C |
| 应用： | 通用 |
| 封装/外壳： | 径向 - 圆盘形 |
| 尺寸/尺寸： | 0.472" 直径（12.00mm） |
| 高度 - 座高（最大）： | 0.591"（15.00mm） |
| 引线间隔： | 0.295"（7.50mm） |
| 特点： | 高电压，低耗散因子 |
| 包装： | 带盒（TB） |
| 引线型： | 直形 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页当前第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页
! Note ? Please read rating and ! CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
? This catalog has only typical speci?cations. Therefore, please approve our product speci?cations or transact the approval sheet for product speci?cations before ordering.
C85E.pdf
Apr.7,2014
Type KY/KH/KX Speci?cations and Test Methods
Operating Temperature Range: -40 to +125°C (Except for UL/VDE, -25 to +125°C)
No.
1
2
3
Item
Appearance and Dimensions
Marking
Capacitance
Specifications
No visible defect, and dimensions are within
specified range.
To be easily legible
Within specified tolerance
Test Method
The capacitor should be visually inspected for evidence of
defect.
Dimensions should be measured with slide calipers.
The capacitor should be visually inspected.
4
Dissipation Factor (D.F.)
Q
Char.
B, E
F
SL
Specifications
D.F. V 2.5%
D.F. V 5.0%
Q U 400+20C* 1 (C F 30pF)
Q U 1000 (C U 30pF)
The capacitance, dissipation factor and Q should be measured
at 20?C with 1±0.1kHz (char. SL: 1±0.1MHz) and AC5V(r.m.s.)
max.
The insulation resistance should be measured with
5
Insulation Resistance (I.R.)
10000M Ω min.
DC500±50V within 60±5 sec. of charging.
The voltage should be applied to the capacitor through a
resistor of 1M Ω .
The capacitor should not be damaged when the test voltages
from Table 1 are applied between the lead wires for 60 sec.
<Table 1>
Between Lead
Wires
No failure
Type
KY
KH
KX
Test Voltage
For lead spacing F=5mm AC2000V(r.m.s.)
For lead spacing F=7.5mm AC2600V(r.m.s.)
AC2600V(r.m.s.)
AC4000V(r.m.s.)
First, the terminals of the capacitor
should be connected together. Then,
as shown in the figure at right, a metal
6
Dielectric
Strength
foil should be closely wrapped around
the body of the capacitor to the
distance of about 3 to 6mm from
Metal
Foil
about
3 to 6mm
each terminal.
Body
Insulation
No failure
Then, the capacitor should be inserted
into a container filled with metal balls
of about 1mm diameter. Finally, AC
Metal
Balls
voltage from Table 2 is applied for 60 sec. between the
capacitor lead wires and metal balls.
<Table 2>
Type
KY
KH
KX
Test Voltage
AC2600V(r.m.s.)
AC2600V(r.m.s.)
AC4000V(r.m.s.)
The capacitance measurement should be made at each step
Char. Capacitance Change
specified in Table 3.
7
Temperature Characteristics
B Within ±10%
–55
–80
E Within +20 %
F Within +30 %
(Temp. range: -25 to +85°C)
Step
1
<Table 3>
Temperature (oC)
20±2
2
-25±2
Char. Temperature Coefficient
3
20±2
SL
+350 to -1000ppm/°C
4
85±2
(Temp. range: +20 to +85°C)
5
20±2
The lead wire of a capacitor should be dipped into molten
8
Solderability of Leads
Lead wire should be soldered with uniform coating
on the axial direction over 3/4 of the circumferential
direction.
solder for 2±0.5 sec.
The depth of immersion is up to about 1.5 to 2.0mm from the
root of lead wires.
Temp. of solder: Lead Free Solder (Sn-3Ag-0.5Cu) 245±5°C
H63 Eutectic Solder 235±5°C
* 1 "C" expresses nominal capacitance value (pF).
Continued on the following page.
15
相关PDF资料 |
PDF描述 |
|---|---|
| DG2515DQ-T1-E3 | IC SWITCH DUAL SPDT 10MSOP |
| GRM31M6R1H911JZ01L | CAP CER 910PF 50V 5% R2H 1206 |
| GRM32RR71C475KA01K | CAP CER 4.7UF 16V 10% X7R 1210 |
| GRM3196R2A561JZ01D | CAP CER 560PF 100V 5% R2H 1206 |
| GRM3196R2A511JZ01D | CAP CER 510PF 100V 5% R2H 1206 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DEI05L | 制造商:Electrolube 功能描述:DEIONISED WATER, 5L |
| DEI1270A-MES | 制造商:DEI 功能描述: |
| DEIC420 | 制造商:IXYS Corporation 功能描述:MOSFET DRVR 20A 1-OUT Lo Side Non-Inv 28-Pin SOIC 制造商:IXYS Corporation 功能描述:IC DRIVER MOSFET DE275 制造商:IXYS Corporation 功能描述:IC, DRIVER, MOSFET DE275 |
| DEIC421 | 功能描述:RF MOSFET DRIVER 20 AMP RoHS:是 类别:集成电路 (IC) >> PMIC - MOSFET，电桥驱动器 - 外部开关 系列:- 标准包装:50 系列:- 配置:高端 输入类型:非反相 延迟时间:200ns 电流 - 峰:250mA 配置数:1 输出数:1 高端电压 - 最大（自引导启动）:600V 电源电压:12 V ~ 20 V 工作温度:-40°C ~ 125°C 安装类型:通孔 封装/外壳:8-DIP（0.300"，7.62mm） 供应商设备封装:8-DIP 包装:管件 其它名称:*IR2127 |
| DEIC515 | 制造商:IXYS Corporation 功能描述:IC DRIVER MOSFET DE150 制造商:IXYS Corporation 功能描述:IC, DRIVER, MOSFET DE150 制造商:IXYS Corporation 功能描述:IC, RF MOSFET DRIVER LOW SIDE DE150IC-10, Device Type:MOSFET, Module Configuration:Low Side, Peak Output Current:15A, Supply Voltage Min:8V, Supply Voltage Max:30V, Driver Case Style:DE150-IC, No. of Pins:10, Input Delay:17.4ns , RoHS Compliant: Yes |
发布紧急采购，3分钟左右您将得到回复。