- 您现在的位置：买卖IC网 > PDF目录17058 > DEMOS08AC16KIT (Freescale Semiconductor)KIT DEMO FOR S08AC16 FAMILY PDF资料下载
参数资料
| 型号： | DEMOS08AC16KIT |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 5/8页 |
| 文件大小： | 0K |
| 描述： | KIT DEMO FOR S08AC16 FAMILY |
| 标准包装： | 1 |
| 类型： | MCU |
| 适用于相关产品： | MC9S08AC16 |
| 所含物品： | 板 |
Flexis? Series—Quick Start Guide
3. From new menu, click on “Drivers & PEMicro Demo
Board Toolkit”. This will launch the appropriate
menu for downloading toolkit.
4. From new menu, click on “PEMicro Demo Board
Toolkit.” This will prompt you to save the file
“Embedded_Multilink_Toolkit.zip” to your
computer.
5. Extract zip file to desired location on your
computer. This will create a “pemicro/toolkit”
folder that includes all graphical utilities.
For more information on the Demo Board
Toolkit read the board user manual
(DEMOAC_UM.pdf) on www.freescale.com/
flexis or on the DVD under Documentation
> Development System Documentation >
DEMOAC User Manual of the DVD menu.
For new and upgraded utilities to the Demo
Board Toolkit, visit http://www.pemicro.com/
STEP
3
Connect Board to Computer
USB driver installation is a one-time
required step, to be completed after
CodeWarrior installation.
1. Remove board from anti-static pouch. The
appropriate daughter card for your kit will be
mounted on the base board.
2. If your daughter card was purchased separately
from the DEMOAC board, remove the existing
daughter card from the DEMOAC board if
necessary and install the new daughter card
at connector JM1 – JM4. Ensure the module is
properly oriented and fully seated.
3. Connect the provided USB cable to a free USB port
on your computer and then to the USB connector
on the board.
4. Operating system will recognize your board as new
hardware and will prompt you to install the USB
drivers. Choose recommended option to install the
software automatically. USB drivers for your board
were pre-loaded in CodeWarrior installation.
5. Follow on-screen instructions until all USB driver
installations are complete. The green USB LED on-
board should illuminate.
STEP
4
Test by Running the
Quick Start Application
Now that you have successfully completed
the software and hardware setup, test your
board by running the Quick Start Application
pre-loaded in the microcontroller’s on-chip
flash memory.
The programmed application samples key-
board input pins connected to push buttons.
Each push button press lights the associated
LED with a pulse-width modulated
signal. The application also samples the
potentiometer using the microcontroller’s
analog-to-digital converter and uses the
result to select one of the
four LEDs.
1. Turn the PWRSW switch to the ON position.
The green +5V LED will illuminate and
application will start.
2. Press push buttons labeled SW1, SW2, SW3 and
SW4. The associated LED at LED1, LED2, LED3 or
LED4 will blink while the button is pressed. Each
LED is driven by a pulse-width modulated signal.
3. Rotate the potentiometer RV1 clockwise and
counter-clockwise. As the potentiometer is rotated,
LEDs 1-4 will light sequentially.
相关PDF资料 |
PDF描述 |
|---|---|
| RPP20-4815D/N | CONV DC/DC 20W 36-75VIN +/-15V |
| DEMOS08AC128KIT | KIT DEMO FOR S08AC128 FAMILY |
| RPP20-4812S/N | CONV DC/DC 20W 36-75VIN 12VOUT |
| EVAL-AD7708EBZ | BOARD EVAL FOR AD7708 |
| RPP20-4812D/N | CONV DC/DC 20W 36-75VIN +/-12V |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DEMOS08AC60KIT | 功能描述:开发板和工具包 - S08 / S12 DEMO KIT FOR AC FAMILY RoHS:否 产品:Development Kits 工具用于评估:MC9S12G128 核心:S12 接口类型:CAN, LIN, RS-232, USB 工作电源电压:5 V 制造商:Freescale Semiconductor |
| DEMO-SENSOR-IDECDS | 制造商:IDEC Corporation 功能描述:IDEC-DS sensor demo case |
| DEMO-SHP-LQ104V1DG62 | 制造商:Spectrah Dynamics 功能描述:DEMO-SHP-LQ104V1DG62 - Bulk |
| DEMO-SLC30N-IPS | 制造商:IDEC CORPORATION 功能描述:PANEL |
| DEMO-SMARTSTART | 制造商:IDEC Corporation 功能描述:SmartRelay Demo Kit |
发布紧急采购，3分钟左右您将得到回复。