- 您现在的位置：买卖IC网 > PDF目录376644 > DF15(0.8)-40DS-0.65V(50) (Electronic Theatre Controls, Inc.) 0.65mm Pitch SMT Board to Board Connector PDF资料下载
参数资料
| 型号： | DF15(0.8)-40DS-0.65V(50) |
| 厂商： | Electronic Theatre Controls, Inc. |
| 英文描述： | 0.65mm Pitch SMT Board to Board Connector |
| 中文描述： | 0.65mm间距表面贴装板对板连接器 |
| 文件页数： | 11/11页 |
| 文件大小： | 365K |
| 代理商： | DF15(0.8)-40DS-0.65V(50) |
A296
1.
Recommended Temperature Profile (SMT)
2.
Recommended Manual Soldering Condition (SMT)
3.
Recommended Screen Thickness (SMT)
4. Board Warp
(
SMT
)
5. Cleaning Condition
6. Cautions
Note1: Maximum twice action is allowed under the same condition. However, the interval between
the first process and second actions must be maintained at the room temperature.
Note2: The temperature indicates the board surface temperature in the connector lead area.
Soldering iron temperature: 290
±
10
, Soldering time: Within 2 seconds
0.15mm
Max 0.03mm in the connector center area, based on the both connector edges
Refer to the "Nylon Connector Use Hand book".
I
The receptacle is designed in a structure where contacts are exposed. Touching it with bare
hands would cause contact failure or electrostatic element damage.
I
Where no board is mounted, the insertion or extraction will cause damage or deformation in the contacts.
I
Avoid retaining the board with the connector only, and fix the board by any other means than the connector.
I
Excessive scoop insertion or extraction may result in damage.
I
In the manual soldering process, don't carry out the flux coating which will cause a flux blister on the connector.
I
The color phase of this product may be slightly different from that of the formed product
according to the manufacturing lot. However, the difference doesn't affect the performance.
B
Precautions
相关PDF资料 |
PDF描述 |
|---|---|
| DF15(0.8)-40DS-0.65V(51) | 0.65mm Pitch SMT Board to Board Connector |
| DF15(0.8)-50DS-0.65V(50) | 0.65mm Pitch SMT Board to Board Connector |
| DF15(0.8)-50DS-0.65V(51) | 0.65mm Pitch SMT Board to Board Connector |
| DF15(1.8)-20DS-0.65V(50) | 0.65mm Pitch SMT Board to Board Connector |
| DF15(1.8)-20DS-0.65V(51) | 0.65mm Pitch SMT Board to Board Connector |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DF1508FP000 | 制造商:Thomas & Betts 功能描述:100A,CON,4P5W,MG,508,3P220/380 |
| DF1508M | 功能描述:桥式整流器 1.5A 800V RoHS:否 制造商:Vishay 产品:Single Phase Bridge 峰值反向电压:1000 V 最大 RMS 反向电压: 正向连续电流:4.5 A 最大浪涌电流:450 A 正向电压下降:1 V 最大反向漏泄电流:10 uA 功率耗散: 最大工作温度:+ 150 C 长度:30.3 mm 宽度:4.1 mm 高度:20.3 mm 安装风格:Through Hole 封装 / 箱体:SIP-4 封装:Tube |
| DF1508S | 功能描述:桥式整流器 1.5A 800V RoHS:否 制造商:Vishay 产品:Single Phase Bridge 峰值反向电压:1000 V 最大 RMS 反向电压: 正向连续电流:4.5 A 最大浪涌电流:450 A 正向电压下降:1 V 最大反向漏泄电流:10 uA 功率耗散: 最大工作温度:+ 150 C 长度:30.3 mm 宽度:4.1 mm 高度:20.3 mm 安装风格:Through Hole 封装 / 箱体:SIP-4 封装:Tube |
| DF1508S-E3/45 | 功能描述:桥式整流器 1.5 Amp 800 Volt RoHS:否 制造商:Vishay 产品:Single Phase Bridge 峰值反向电压:1000 V 最大 RMS 反向电压: 正向连续电流:4.5 A 最大浪涌电流:450 A 正向电压下降:1 V 最大反向漏泄电流:10 uA 功率耗散: 最大工作温度:+ 150 C 长度:30.3 mm 宽度:4.1 mm 高度:20.3 mm 安装风格:Through Hole 封装 / 箱体:SIP-4 封装:Tube |
| DF1508S-E3/77 | 功能描述:桥式整流器 1.5 Amp 800 Volt 50 Amp IFSM RoHS:否 制造商:Vishay 产品:Single Phase Bridge 峰值反向电压:1000 V 最大 RMS 反向电压: 正向连续电流:4.5 A 最大浪涌电流:450 A 正向电压下降:1 V 最大反向漏泄电流:10 uA 功率耗散: 最大工作温度:+ 150 C 长度:30.3 mm 宽度:4.1 mm 高度:20.3 mm 安装风格:Through Hole 封装 / 箱体:SIP-4 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。