参数资料
| 型号： | DF33-4S-3.3C |
| 厂商： | Hirose Electric Co Ltd |
| 文件页数： | 8/8页 |
| 文件大小： | 0K |
| 描述： | CONN SOCKET HSG 4POS 3.3MM |
| 产品培训模块： | Board-to-Wire Connectors |
| 产品目录绘图： | DF33-xS Series Housing |
| 标准包装： | 100 |
| 系列： | DF33 |
| 连接器类型： | 插座 |
| 触点类型：： | 母形插口 |
| 位置数： | 4 |
| 间距： | 0.130"（3.30mm） |
| 行数： | 1 |
| 安装类型： | 自由悬挂 |
| 触点终端： | 压接 |
| 紧固型： | 销锁 |
| 颜色： | 自然色 |
| 包装： | 散装 |
| 请注意： | 不提供触点 |
| 配套产品： | H11654-ND - CONN HEADER 4POS 3.3MM PCB TIN |
| 相关产品： | H11667-ND - CONN CRIMP TERM FEMALE 20-22AWG H11667TR-ND - CONN CRIMP TERM FEMALE 20-22AWG H11664-ND - CONN RETAINER SINGLE ROW 4POS |
| 其它名称： | *DF33-4S-3.3C H11659 |
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
DF33 Series q 3.3 mm Contact Pitch, Connectors for Internal Power Supplies
s Precautions
q Forcefully unmating the connectors will risk damaging them; therefore, when it is difficult to unmate a
connector, first gently press down on it, then release the lock to allow removal.
q When performing a potting process, pay attention to the surface tension of the resin and fill the resin
accordingly.
q Depending on the method by which wires have been routed within the equipment, tension may be exerted
on the wires and a load applied to the contacts. Use of a retainer is recommended because of this.
q When reusing crimp contacts, raise the lance.
q Depending on the manufacturing lot and the storage conditions that have been used, the shade of the
molded parts may change somewhat; however, this will not affect performance.
s Rating
The rated current listed in the catalog indicates the nominal current per contact. When all contacts will be
carrying current, use a current limited to about one third of the listed rating.
Note that even when the rated current of the connector body is 3 A, when the nominal current of the
specified wire is 1 A, the connector shall be used to handle 1 A overall.
Also, do not mate or unmate by hot plug. (See Note 1)
Note 1: The hot wire means that the wires are mated or unmated while electricity is being supplied to them.
s Application Environment
Please contact us when the application environment is such that the equipment will be used under
repetitively hot and cold temperatures.
?
5-23,OSAKI 5-CHOME,SHINAGAWA-KU,TOKYO 141-8587,JAPAN
PHONE: 81-3-3491-5300, FAX: 81-3-3495-5230
http://www.hirose.com
http://www.hirose-connectors.com
8
The contents of this catalog are current as of date of 09/2010. Contents are subject to change without notice for the purpose of improvements.
相关PDF资料 |
PDF描述 |
|---|---|
| 770101152 | RES ARRAY 1.5K OHM 9 RES 10-SIP |
| 766143224GP | RES ARRAY 220K OHM 7 RES 14-SOIC |
| 770101122 | RES ARRAY 1.2K OHM 9 RES 10-SIP |
| PS2761-1-A | OPTOISOLATOR 1CH 4-SMD |
| 766143224G | RES ARRAY 220K OHM 7 RES 14-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DF33-5P-3.3DSA(24) | 功能描述:板对板与夹层连接器 HDR 5P 3.3MM PCB TIN RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| DF33-5P-7.92DSA(05) | 制造商:Hirose 功能描述: |
| DF33-5RS-3.3 | 功能描述:板对板与夹层连接器 RETAINER SROW 5POS RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| DF33-5S-3.3C | 功能描述:板对板与夹层连接器 SOC HSG 5POS 3.3MM RoHS:否 制造商:JAE Electronics 系列:WP3 产品类型:Receptacles 节距:0.4 mm 叠放高度:1 mm 安装角: 位置/触点数量:50 排数:2 外壳材料:Plastic 触点材料:Copper Alloy 触点电镀:Gold 电压额定值:50 V 电流额定值:0.4 A |
| DF33-6DP-3.3C | 制造商:HRS 制造商全称:HRS 功能描述:3.3 mm Contact Pitch, Connectors for Internal Power Supplies |
发布紧急采购，3分钟左右您将得到回复。