A136
DF9 Seriesq1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
sProduct Specifications
Rating
Current rating 0.5A
Operating Temperature Range -45 to +125 (Note 1) Storage Temperature Range -10 to +60 (Note 2)
Voltage rating150V AC
Operating Humidity Range 40 to 80%
Storage Humidity Range 40 to 70%
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature
Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during
transportation.
Note:The gold plated product contact area is plated with gold, and lead plated with tin.
sMaterial
Product
Part
Material
Finish
Remarks
Item
specification
Condition
1. Insulation Resistance
500M ohms min.
100V DC
2. Withstanding voltage
No flashover or insulation breakdown.
250V AC/1 minute
3. Contact Resistance
50m ohms max.
100mA
4. Vibration
No electrical discontinuity of 1s or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state) Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. 96 hours at temperature of 40 and humidity of 90% to 95%
6. Temperature Cycle
Contact resistance: 50m ohms max. Insulation resistance: 500M ohms min. (-55: 30 minutes 5 to 35: 10 minutes 85: 30 minutes 5 to 35: 10 minutes) 5 cycles
7. Durability (Mating/un-mating) Contact resistance: 50m ohms max:
Tin plating: 30 cycles
Gold plating: 100 cycles
8. Resistance to Soldering heat
No deformation of components affecting performance.
Reflow: At the recommended temperature profile
Manual soldering: 300 for 3 seconds
Receptacle/Header
Insulator
Polyamide
Beige
UL94V-0
Contact
Phosphor copper
Tin plated or gold plated
–––––––
Metal fitting
Brass
Tin plating
–––––––
s Ordering Information
Please determine the specific product. If needed, please select and order products from the product No. as listed on catalog
page A280~A284.
*Refer to page A141 for the bottom entry type (DF9L).
DF9
# - * S - 1 V (**)
q
e
wr
t yu
q Series Name : DF9
w Type
e Number of Contacts
9 to 25,31,41,51
r Connector Type
S: Receptacle
P: Header
t Contact Pitch
: 1mm
y Contact Type
V: Straight SMT
u Contact Surface Finish/Packaging Type
(22)(32): Tin plated, embossed tape packaging
(69): Gold plated, embossed tape packaging
qReceptacle/Header
Fitting Boss
Blank
KK
A
∞
K
B
K
∞
C
∞∞
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.