参数资料
| 型号： | DK-409N-1 |
| 厂商： | Luminus Devices Inc |
| 文件页数： | 4/7页 |
| 文件大小： | 0K |
| 描述： | KIT DEV PHLATLIGHT CBM360 LED |
| 标准包装： | 1 |
| 系列： | PhlatLight® |
| 主要目的： | 照明，LED |
| 已用 IC / 零件： | CBM-360 |
| 主要属性： | 可调光 |
| 已供物品： | 板，线缆，文档，散热片，硬件 |
| 其它名称： | 1214-1135 |
PhlatLight ? DK-409N Series Development Kit Manual
3. User Instructions
The following procedure explains how to setup the PhlatLight Evaluation Kit. It is recommended that the
table be equipped with ESD protection.
Important Note: The driver board is capable of providing 9A of current to any device. Not all PhlatLight
products can be powered at 9A. Care must be taken to ensure the proper current is applied to the
device. Consult the product data sheets for current limitations of specific devices.
Equipment Required by User
In order to power and use the development kit, some additional equipment is required. Table 1 lists the
type of equipment as well as a suggested part. An additional list of other compatible power supplies is
provided in Appendix B.
Lab Equipment
24V Lab Power Supply
Oscilloscope
0-10V Power Supply
Multimeter
Photodetector
Recommended Part
Lambda ZUP36-12
Tektronix TDS 3024B
Lambda ZUP10-20
Fluke 187
Thorlabs PDA10A
Table 1: Additional Lab Equipment
3.1
Electrical Connections
The following sections assume that the user has all of the equipment listed in Table 1.
1. Prepare the power supply and ensure the power supply being used is capable of providing enough
power to the devices. A single channel at full power will draw up to ~130W at 24V and 5.5A. If
using a variable power supply like the Lambda ZUP36-12, preset the voltage to 24V and set the
current to the maximum. Power off the supply until all connections are established and the
board settings are ready.
2. Attach all of the wiring included in the kit. The black, 6” ERNI cable connects the LED to the
driver board. Check to be sure the short 2-pin fan cable is connected to the driver board at the
J3 position, labeled FAN.
960018 Rev A ? 2008 Luminus Devices, Inc. All rights reserved.
Page 4
相关PDF资料 |
PDF描述 |
|---|---|
| DK-414N-4 | KIT DEV PHLATLIGHT CBM380 LED |
| DK-PS21765 | KIT DEV INTERFACE IPM MINIDIP |
| DK-PS21965 | KIT DEV INTERFACE IPM MINIDIP |
| DK-RV-1.8-TRK-33 | EVAL KIT SQUIGGLE MOTOR + SENSOR |
| DK-SI-4S100G2N | KIT DEV STRATIX IV TRANSCEIVER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DK409N-1 | 功能描述:LED 照明开发工具 Dev Kit 4-CH RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
| DK-409N-4 | 制造商:Luminus Devices 功能描述: 制造商:Luminus Devices 功能描述:LED DEV KIT DESIGNED FOR DEV OF CSM-360 & CBM-360 SOL - Bulk |
| DK411 | 功能描述:LCD DPM +9V 200MV 3.5 DIGIT -GRN RoHS:是 类别:工业控制，仪表 >> 仪表 - 面板，数字 系列:DK100/300 标准包装:12 系列:* 其它名称:Q7072030 |
| DK412 | 功能描述:LCD DPM +9V 2V 3.5 DIGIT -GREEN RoHS:是 类别:工业控制，仪表 >> 仪表 - 面板，数字 系列:DK100/300 标准包装:12 系列:* 其它名称:Q7072030 |
| DK-414N-4 | 功能描述:LED 照明开发工具 Dev Kit 4-CH 14A Driver Brd RoHS:否 制造商:Fairchild Semiconductor 产品:Evaluation Kits 用于:FL7732 核心: 电源电压:120V 系列: 封装: |
发布紧急采购，3分钟左右您将得到回复。