参数资料
| 型号： | DLP-IOR4 |
| 厂商： | DLP Design Inc |
| 文件页数： | 2/4页 |
| 文件大小： | 0K |
| 描述： | MODULE LATCHING-RELAY 4-CH |
| 产品目录绘图： | DLP-IOR4 |
| 标准包装： | 1 |
| 系列： | DLP-IOR4 |
| 附件类型： | 模块卡锁继电器 |
| 技术规格： | 4 锁存继电器 |
| 适用于相关产品： | USB |
| 产品目录页面： | 635 (CN2011-ZH PDF) |
| 其它名称： | 813-1011 |
3.0 ABSOLUTE MAXIMUM RATINGS
Stresses above those listed here may cause permanent damage to the DLP-IOR4:
?
?
Operating Temperature: 0-70°C
Current on Any I/O Pin: 4A
4.0 WARNINGS
?
?
Unplug from the host PC before connecting to the DLP-IOR4.
Observe static precautions to prevent damage to the DLP-IOR4 module.
5.0 USB DRIVERS
USB drivers for the following operating systems are available for download from the DLP Design
website ( http://www.dlpdesign.com ):
Windows XP x64
Windows Server 2003
Windows 2000
Windows 98, ME
Mac OSX
Mac OS9
Mac OS8
Linux
Note : If you are using the dual-mode drivers from FTDI (CDM2.02.04) and wish to use the Virtual
COM Port (VCP) mode, then it may be necessary to disable the D2XX drivers first via Device
Manager. To do so, right click on the entry under USB Controllers that appears when the DLP-IOR4
is connected, select Properties, select the Advanced tab, check the option for Load VCP and click OK.
Once you unplug and then replug the DLP-IOR4 module, a COM port should appear in Device
Manager under Ports (COM & LPT).
6.0 USING THE DLP-IOR4
Simply connect the DLP-IOR4 to the PC to initiate the loading of drivers. Once the drivers are loaded,
the DLP-IOR4 is ready for use. All commands are single-byte commands. Please note that the Ping
command is the only command that results in data being returned to the host from the DLP-IOR4.
You can either utilize a simple terminal emulator program or write your own program using your
language of choice. Begin by opening the COM port, set the Baud Rate to 9600 (1 start bit, no parity,
8 data bits, 1 stop bit, no flow control), and send single-byte commands as shown in Table 1. The
Ping command can be used to locate the correct COM port used for communicating with the DLP-
IOR4, or you can look in Device Manager to see which port Windows has assigned to the DLP-IOR4.
A
1
B
A
2
B
A
3
B
A
4
B
Rev. 1.1 (September 2007)
2
? DLP Design, Inc.
相关PDF资料 |
PDF描述 |
|---|---|
| DLP-TEMP-G | MODULE DATA-ACQUISITION 3-CH |
| DLP-TXRX-G | MODULE USB-TO-TTL SRL UART CONV |
| DLP-USB1232H | MODULE USB-TO-UART/FIFO HS 18DIP |
| DLP-USB232M-G | MODULE USB-TO-TTL SRL UART CONV |
| DLP-USB232R | MODULE USB-TO-SRL UART 18-DIP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DLP-LC-DLP5500-10R | 功能描述:KIT DEV DLP LIGHTCOMANDER RoHS:是 类别:编程器，开发系统 >> 评估演示板和套件 系列:LightCommander™ 标准包装:1 系列:PSoC® 主要目的:电源管理，热管理 嵌入式:- 已用 IC / 零件:- 主要属性:- 次要属性:- 已供物品:板，CD，电源 |
| DLPLCR4500EVM | 制造商:Texas Instruments 功能描述:DLP 4500 LIGHTCRAFTER MODULE - Boxed Product (Development Kits) 制造商:Texas Instruments 功能描述:DLP LIGHTCRAFTER 4500 制造商:Texas Instruments 功能描述:Display Development Tools DLP Lightcrafter 4500 制造商:Texas Instruments 功能描述:DLP 4500 LightCrafter Module |
| DLPLCR6500EVM | 功能描述:DLP6500, DLPC900 - Reference Design, Projection DLP Evaluation Board 制造商:texas instruments 系列:- 零件状态:有效 主要用途:参考设计，投影 DLP 嵌入式:- 使用的 IC/零件:DLP6500，DLPC900 主要属性:- 辅助属性:- 所含物品:板 标准包装:1 |
| DLPLCR9000EVM | 功能描述:EVAL BOARD FOR DLPLCR9000 制造商:texas instruments 系列:- 零件状态:在售 主要用途:参考设计，投影 DLP 嵌入式:- 使用的 IC/零件:DLP9000，DLPC900 主要属性:- 辅助属性:- 所含物品:板 标准包装:1 |
| DLPLIGHTCRAFTER | 功能描述:开发板和工具包 - 其他处理器 DLP LightCrafter RoHS:否 制造商:Freescale Semiconductor 产品:Development Systems 工具用于评估:P3041 核心:e500mc 接口类型:I2C, SPI, USB 工作电源电压: |
发布紧急采购，3分钟左右您将得到回复。