参数资料
型号: DM1601-9RD3AHFU
元件分类: 电源模块
英文描述: 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
封装: 168.50 X 111.20 MM, 38.70 MM HEIGHT, METAL, CASE M02, MODULE
文件页数: 1/24页
文件大小: 536K
代理商: DM1601-9RD3AHFU
M-Family
DC-DC Converters <100 W
Rugged Environment
7 - 2
Edition 2/96 - Melcher AG
MELCHER
The Power Partners.
7.1
50 W DC-DC (AC-DC) Converters
M-Family
Class I Equipment
Single output:
series AM...LM 1000
Dual output:
series AM...LM 2000
Triple output:
series AM...LM 3000
Class II Equipment (double insulation)
Single output:
series CMZ/DMZ/LMZ 1000
Dual output:
series CMZ/DMZ/LMZ 2000
Triple output:
series CMZ/DMZ/LMZ 3000
Extremely wide input voltage range suitable for
battery (and AC) operation
Efficient input filter and built-in surge and transient
suppression circuitry
4 kVrms input to output electric strength test
Outputs individually isolated and controlled
Outputs fully protected against overload
Table of Contents ........................................... Page
Description .................................................................. 7 - 2
Type Survey ................................................................ 7 - 3
Safety and Installation Instructions ............................. 7 - 4
Functional Description ................................................. 7 - 6
Electrical Input Data .................................................... 7 - 7
Electrical Output Data ................................................. 7 - 9
EMC and Immunity to Input Transients ..................... 7 - 13
Supplementary Data ................................................. 7 - 15
Description of Options ............................................... 7 - 16
Immunity to Environmental Conditions ...................... 7 - 22
Mechanical Data ....................................................... 7 - 24
Type Key and Product Marking ................................. 7 - 25
Description
The M-family of DC-DC (AC-DC) converters represents a
broad and flexible range of power supplies for use in ad-
vanced industrial electronic systems. Features include high
efficiency, reliability, low output voltage noise and excellent
dynamic response to load/line changes due to individual
regulation of each output.
The converter inputs are protected against surges and tran-
sients occuring at the source lines. An input over- and
undervoltage cut-out circuitry disables the outputs if the in-
put voltage is outside the specified range. Certain types in-
clude an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of built-in suppres-
sor diodes. The outputs can be inhibited by a logic signal
applied to the connector pin 2 (i). If the inhibit function is not
used pin 2 should be connected with pin 23 to enable the
outputs.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to the international safety standard
IEC 950 and have been approved by the safety agencies
LGA (Germany) and UL (USA). The UL Mark for Canada
has been officially recognized be regulatory authorities in
provinces across Canada.
The case design allows operation at nominal load up to
71
°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C but
the case temperature should remain below 95
°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
TC exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19 inch rack sys-
tems according to DIN 41494, or be chassis mounted.
Case: aluminium, black finish, self cooling.
Dimensions: 38.7
× 111.2 × 168.5 mm. Weight: 770 g.
Safety according to IEC 950
LGA
C
相关PDF资料
PDF描述
DMZ1601-7PD8AHFU 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
DMZ2540-7PD8AHFU 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
DMZ3020-9PD4AHFU 3-OUTPUT DC-DC REG PWR SUPPLY MODULE
DP1101-9DVW 1-OUTPUT 125 W DC-DC REG PWR SUPPLY MODULE
DRD1215 2-OUTPUT 2 W DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
DM160211 功能描述:触摸传感器开发工具 mTouch Projected Cap Dev Kit RoHS:否 制造商:Cypress Semiconductor 工具用于评估: 接口类型: 工作电压: 最大工作温度:
DM160213 功能描述:开发板和工具包 - PIC / DSPIC BodyCom System Development Kit RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM160214 制造商:Microchip Technology Inc 功能描述:LIGHTING COMMUNICATIONS DEVELOPMENT PLATFORM - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:BOARD DEV LIGHTING COMM MAIN 制造商:Microchip Technology Inc 功能描述:PIC16F1947 LIGHTING COMMUNICA 制造商:Microchip Technology Inc 功能描述:PIC16F1947 LIGHTING COMMUNICATION BOARD 制造商:Microchip Technology Inc 功能描述:PIC16F1947, LIGHTING COMMUNICATION BOARD 制造商:Microchip Technology Inc 功能描述:PIC16F1947, LIGHTING COMMUNICATION BOARD, Silicon Manufacturer:Microchip, Core A 制造商:Microchip Technology Inc 功能描述:Lighting Communications Development Platform, General Purpose 制造商:Microchip Technology Inc 功能描述:PIC16F1947, LIGHTING COMMUNICATION BOARD, Silicon Manufacturer:Microchip, Core Architecture:PIC, Core Sub-Architecture:PIC16F, Silicon Core Number:PIC16F1947, Silicon Family Name:PIC16F19xx, Kit Contents:Communication Board
DM160217 功能描述:位置传感器开发工具 MGC3130-Sabrewing Evaluation Kit RoHS:否 制造商:Microchip Technology 工具用于评估: 接口类型: 工作电压:
DM160218 制造商:Microchip Technology Inc 功能描述:MGC3130 SINGLE ZONE DEVELOPMENT KIT "HILLSTAR" - Boxed Product (Development Kits) 制造商:Microchip Technology Inc 功能描述:KIT MGC3130 SINGLE ZONE HILLSTAR 制造商:Microchip Technology Inc 功能描述:MGC3130 Single Zone Development Kit "Hillstar" 制造商:Microchip Technology Inc 功能描述:MGC3130 Single Zone Development Kit "Hillstar", Accessories