参数资料
型号: DM163001
厂商: Microchip Technology
文件页数: 11/57页
文件大小: 0K
描述: BOARD DEMO PICDEM-1
标准包装: 3
其它名称: DM163001R
DM163001R-ND
PICDEM-1
Chapter 2. Getting Started
To erase an EEPROM/Flash device:
? Enable your programmer in MPLAB. If you change programmers, you
will have to restart MPLAB.
? Place the device in the programmer.
? Select Erase Program Memory or the equivalent erase command from
the Programmer menu.
Note:
You do not have to erase an EEPROM/Flash device before repro-
gramming it.
2.2.2
Reprogramming the Sample Device
To reprogram the erased sample device, the following will be necessary:
1. Sample programs installed on the hard drive
The PICDEM-1 package includes a 3.5-inch disk which contains sample
programs for all the processor types supported. Instructions on how to
install the programs can be found in the readme file also on the disk.
2. An assembler, such as MPASM available with MPLAB
Sample programs may be used to program the sample device once they
have been assembled. Microchip Technology’s MPLAB Integrated Devel-
opment Environment (IDE) includes an assembler (MPASM). However,
other assemblers may be used. For a list of PICmicro-compatible assem-
blers, please refer to the Microchip Third Party Handbook .
3. A device programmer, such as PRO MATE ? II or PICSTART ? Plus
Once the sample program is in hex file format, a programmer may be used
to program a blank device. Microchip Technology’s PRO MATE II or
PICSTART Plus programmers may be used. Both are compatible with
MPLAB. However, other programmers may be used. For a list of PICmicro-
compatible programmers, please refer to the Microchip Third Party Hand-
book .
If the code protection bit(s) have not been programmed, the on-chip program
memory can be read out for verification purposes.
? 1999 Microchip Technology Inc.
Note:
Microchip does not recommend code protecting windowed
devices.
DS33015C-page 7
相关PDF资料
PDF描述
DM163004-LT BOARD DEMO PICDEM.NET
DM163005 KIT EVAL PIC16C432/433 LIN BUSS
DM163007 PICDEM CAN-LIN 1 FOR 18C658/858
DM163008 KIT MCP2120/2150 FOR IRDA COMM
DM163010 BOARD DEMO PICDEM USB
相关代理商/技术参数
参数描述
DM163002 制造商:Microchip Technology Inc 功能描述:PIC16C64/74 DEMO BOARD
DM163003 功能描述:开发板和工具包 - PIC / DSPIC PICDEM 3 PIC16C923/4 RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM163004 功能描述:开发板和工具包 - PIC / DSPIC USE 579-DM163004-LT RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM163004 制造商:Microchip Technology Inc 功能描述:DEMO BOARD W/TCP/IP ((NW))
DM163004-LT 功能描述:开发板和工具包 - PIC / DSPIC PICDEM.net Demo Kit w/o TCP/IP Lean Book RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压: