- 您现在的位置：买卖IC网 > PDF目录17437 > DRR-20A (Delta Industrial Power)MODULE REDUNDANCY 20A DIN RAIL PDF资料下载
参数资料
| 型号： | DRR-20A |
| 厂商： | Delta Industrial Power |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | MODULE REDUNDANCY 20A DIN RAIL |
| 标准包装： | 1 |
| 类型： | 隔离 |
| 输入电压： | 22 ~ 60V |
| 输出： | 22 ~ 60V |
| 输出数： | 1 |
| 输出 - 1 @ 电流（最大）： | 22 ~ 60 VDC @ 20A |
| 功率（瓦特）： | 120W |
| 安装类型： | DIN 轨道 |
| 工作温度： | -40°C ~ 80°C |
| 效率： | 97% |
| 封装/外壳： | 模块 |
| 尺寸/尺寸： | 4.81" L x 1.97" W x 4.76" H（122.1mm x 50.0mm x 121.0mm） |
| 包装： | 散装 |
| 电源（瓦特）- 最大： | 120W |
| 批准： | CSA，cUL，EN，IEC，PELV，SELV，UL |
| 其它名称： | 603-1633 |
CliQ II Redundancy Module 20A 40A
Redundancy operation with DRP 20A- (40A)
Parallel Operation
When 2 Power Supplies are connected in parallel, they can share the load if the following steps are taken.
Step1. Measure the output voltages at no load from Anode1 to Ground i.e. Voltage Anode1 to Ground of PSU1 and
Voltage Anode2 to Ground of PSU2. If the voltages are not the same, follow Step 2. If they are the same, skip to Step 3.
Step2. . Adjust the output voltages, with the help of VR on the Power Supply front panel market as ADJUST, to the
same level. For e.g. if PSU1 is measuring 24.15Vdc and PSU2 is measuring 24.25Vdc, adjust the output voltage of one
to be the same as the other
Step3. Connect the Power Supply to the end system load and measure the output voltages from A1 to Ground i.e.
Voltage Anode 1 to Ground of PSU1 and Voltage Anode 2 to Ground of PSU2. Ensure that the output voltages are the
same even after the 2 Power Supplies are connected to load. If not, adjust them with the VR available on the front panel.
A tolerance of +/-25mV would be acceptable.
Note
1)
2)
3)
4)
5)
If the output voltage of any Power Supply is higher, it will take the initial load and share the maximum load.
If the output voltages are the same, then an equal load current sharing between the 2 Power Supplies can be
achieved.
The ORing diode must be of an appropriate rating. The rating must be at least 4 times of the output load current
and at least reverse voltage rating of 20Vrr.
The use of a heat sink is advised to ensure the ORing Diode does not overheat.
Recommended Redundancy Module: DRR-20A
www.deltaPSU.com
5
相关PDF资料 |
PDF描述 |
|---|---|
| GSC07DRYN | CONN EDGECARD 14POS DIP .100 SLD |
| GMC07DRYN | CONN EDGECARD 14POS DIP .100 SLD |
| GSC07DRYH | CONN EDGECARD 14POS DIP .100 SLD |
| GMC07DRYH | CONN EDGECARD 14POS DIP .100 SLD |
| GCC12DRTN | CONN EDGECARD 24POS DIP .100 SLD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DRR3010 | 制造商:Knitter-Switch 功能描述:Tube 制造商:KNITTER-SWITCH 功能描述:SWITCH BCD VERT 制造商:KNITTER-SWITCH 功能描述:SWITCH, BCD, VERT 制造商:KNITTER-SWITCH 功能描述:SWITCH, ROTARY, 1 POLE, 10 POS, 30mA, 50VDC; No. of Poles:1; No. of Switch Positions:10; Contact Current AC Max:30mA; Contact Current DC Max:30mA; Contact Voltage DC Max:50V; Series:DRR3000 ;RoHS Compliant: Yes 制造商:knitter-switch 功能描述:Switch DIP SP10T 10 Flush Screwdriver 0.03A 15VDC PC Pins 20000Cycle Thru-Hole |
| DRR3010 | 制造商:KNITTER-SWITCH 功能描述:SWITCH HEX VERTICAL |
| DRR3010C | 制造商:Fujisoku 功能描述:Bulk |
| DRR3016 | 制造商:Knitter-Switch 功能描述:Tube 制造商:KNITTER-SWITCH 功能描述:SWITCH HEX VERT 制造商:KNITTER-SWITCH 功能描述:SWITCH, HEX, VERT 制造商:KNITTER-SWITCH 功能描述:ROTARY TAP SWITCH, 30mA, 50V; No. of Poles:1; No. of Switch Positions:16; Angle of Throw:22.5; Contact Current AC Max:30mA; Contact Current DC Max:30mA; Contact Voltage DC Max:50V; External Depth:6.9mm; External Width:10mm ;RoHS Compliant: Yes 制造商:knitter-switch 功能描述:Switch DIP SP16T 16 Flush Screwdriver 0.03A 15VDC PC Pins 20000Cycle Thru-Hole |
| DRR3016 | 制造商:KNITTER-SWITCH 功能描述:SWITCH HEX VERTICAL |
发布紧急采购，3分钟左右您将得到回复。