- 您现在的位置：买卖IC网 > PDF目录9249 > DS1005S-100/T&R (Maxim Integrated Products)IC DELAY LINE 5TAP 100NS 16-SOIC PDF资料下载
参数资料
| 型号： | DS1005S-100/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/6页 |
| 文件大小： | 0K |
| 描述： | IC DELAY LINE 5TAP 100NS 16-SOIC |
| 标准包装： | 1,000 |
| 标片/步级数： | 5 |
| 功能： | 不可编程 |
| 延迟到第一抽头： | 20ns |
| 接头增量： | 20ns |
| 可用的总延迟： | 100ns |
| 独立延迟数： | 1 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
DS1005
4 of 6
NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open.
3. VCC = 5V @ 25
°C. Delays accurate on both rising and falling edges within ±2 ns or ±3%, whichever
is greater.
4. See Test Conditions.
5. The combination of temperature variations from 25
°C to 0°C or 25°C to 70°C and voltage variations
from 5.0V to 4.75V or 5.0V to 5.25V may produce an additional input-to-tap delay shift of
±1.5 ns or
±4%, whichever is greater.
6. All tap delays tend to vary unidirectionally with temperature or voltage. For example, if TAP 1 slows
down, all other taps will also slow down; TAP 3 can never be faster than TAP 2.
7. Pulse width and duty cycle specifications may be exceeded; however, accuracy will be application-
sensitive (decoupling, layout, etc.).
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
tWI (Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
tRISE (Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
tFALL (Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
input pulse.
tPLH (Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
pulse and the 1.5V point on the leading edge of any tap output pulse.
tPHL (Time Delay, Falling): The elapsed time between the 1.5V point on the trailing edge of the input
pulse and the 1.5V point on the trailing edge of any tap output pulse.
相关PDF资料 |
PDF描述 |
|---|---|
| VE-25N-MW | CONVERTER MOD DC/DC 18.5V 100W |
| VI-26Z-MX-F3 | CONVERTER MOD DC/DC 2V 30W |
| X9314WSZ-3T1 | IC XDCP SGL 32-TAP 10K 8-SOIC |
| VI-26Z-MX-F2 | CONVERTER MOD DC/DC 2V 30W |
| VI-26Z-MX-F1 | CONVERTER MOD DC/DC 2V 30W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1005S-125 | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
| DS1005S-125/T&R | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
| DS1005S-125+ | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
| DS1005S-125+T&R | 制造商:Maxim Integrated Products 功能描述:IC DELAY LINE 5TAP 125NS 16SOIC |
| DS1005S-125+T&R | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。