参数资料
| 型号： | DS1007S-1+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | IC DELAY LINE 3NS 16-SOIC |
| 标准包装： | 45 |
| 功能： | 多个，不可编程 |
| 延迟到第一抽头： | 3ns |
| 可用的总延迟： | 3ns ~ 10ns，9ns ~ 40ns |
| 独立延迟数： | 7 |
| 电源电压： | 4.75 V ~ 5.25 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 管件 |
DS1007
5 of 6
NOTES:
1. All voltages are referenced to ground.
2. Measured with outputs open.
3. VCC = 5V @25
°C. Delays accurate on rising edges within ±2 ns.
4. See Test Conditions below.
5. All output delays in the same speed output tend to vary unidirectionally with temperature or voltage
range (i.e., if Out 2 slows down, all other outputs also slow down).
6. Period specifications may be exceeded; however, accuracy will be application-sensitive (decoupling,
layout, etc.).
7. tPU = 0 ms for Out 1 through Out 4.
TERMINOLOGY
Period: The time elapsed between the leading edge of the first pulse and the leading edge of the
following pulse.
tWI (Pulse Width): The elapsed time on the pulse between the 1.5V point on the leading edge and the
1.5V point on the trailing edge, or the 1.5V point on the trailing edge and the 1.5V point on the leading
edge.
tRISE (Input Rise Time): The elapsed time between the 20% and the 80% point on the leading edge of the
input pulse.
tFALL (Input Fall Time): The elapsed time between the 80% and the 20% point on the trailing edge of the
input pulse.
tPLH (Time Delay, Rising): The elapsed time between the 1.5V point on the leading edge of the input
pulse and the 1.5V point on the leading edge of the corresponding output pulse.
TEST SETUP DESCRIPTION
Figure 3 illustrates the hardware configuration used for measuring the timing parameters on the DS1007.
The input waveform is produced by a precision pulse generator under software control. Time delays are
measured by a time interval counter (20 ps resolution) connected between the input and each output. Each
output is selected and connected to the counter by a VHF switch control unit. All measurements are fully
automated, with each instrument controlled by a central computer over an IEEE 488 bus.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-27Z-MW-F1 | CONVERTER MOD DC/DC 2V 40W |
| M83723/76R2041N | CONN PLUG 41POS STRAIGHT W/PINS |
| MS3108A20-18S | CONN PLUG 9POS RT ANG W/SCKT |
| VI-26Z-MY-F4 | CONVERTER MOD DC/DC 2V 20W |
| DS1021S-25+ | IC DELAY LINE 256TAP 16-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1007S-1/T&R | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:IC DELAY LINE 3NS 16SOIC |
| DS1007S-1/T&R | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
| DS1007S-1+ | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
| DS1007S-1+T&R | 制造商:Maxim Integrated Products 功能描述:IC DELAY LINE 3NS 16SOIC |
| DS1007S-1+T&R | 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。