- 您现在的位置：买卖IC网 > PDF目录97857 > DS1077U-66 (MAXIM INTEGRATED PRODUCTS INC) 66.666 MHz, OTHER CLOCK GENERATOR, PDSO8 PDF资料下载
参数资料
| 型号： | DS1077U-66 |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | Clock Generator |
| 英文描述： | 66.666 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| 封装： | 0.118 INCH, MICRO, SOP-8 |
| 文件页数： | 26/26页 |
| 文件大小： | 491K |
| 代理商： | DS1077U-66 |
DS1077
9 of 21
DATA TRANSFER ON 2-WIRE SERIAL BUS Figure 2
MSB
slave address
R/W
direction
bit
SDA
SCL
START
CONDITION
12
678
9
12
8
9
STOP CONDITION
OR
REPEATED
START CONDITION
3 - 8
acknowledgement
signal from receiver
acknowledgement
signal from receiver
ACK
repeated if more bytes
are transferred
Figure 2 details how data transfer is accomplished on the 2-wire bus. Depending upon the state of the
R/ W bit, two types of data transfer are possible:
1) Data transfer from a master transmitter to a slave receiver. The first byte transmitted by the
master is the slave address. Next, follows a number of data bytes. The slave returns an acknowledge
bit after each received byte.
2) Data transfer from a slave transmitter to a master receiver. The first byte (the slave address) is
transmitted by the master. The slave then returns an acknowledge bit. Next, follows a number of data
bytes transmitted by the slave to the master. The master returns an acknowledge bit after all received
bytes other than the last byte. At the end of the last received byte, a not acknowledge is returned.
The master device generates all of the serial clock pulses and the START and STOP conditions. A
transfer is ended with a STOP condition or with a repeated START condition. Since a repeated START
condition is also the beginning of the next serial transfer, the bus will not be released.
The DS1077 may operate in the following two modes:
1) Slave receiver mode: Serial data and clock are received through SDA and SCL. After each byte is
received, an acknowledge bit is transmitted. START and STOP conditions are recognized as the
beginning and end of a serial transfer. Address recognition is performed by hardware after the slave
address and direction bit have been received.
2) Slave transmitter mode: The first byte is received and handled as in the slave receiver mode.
However, in this mode, the direction bit will indicate that the transfer direction is reversed. Serial data
is transmitted on SDA by the DS1077 while the serial clock is input on SCL. START and STOP
conditions are recognized as the beginning and end of a serial transfer.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1077Z-133 | 133.333 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| DS1077U-120 | 120 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| DS1077U-133 | 133.333 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| DS1077Z-120 | 120 MHz, OTHER CLOCK GENERATOR, PDSO8 |
| DS1077Z-66 | 66.666 MHz, OTHER CLOCK GENERATOR, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1077U-66/T&R | 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077U-66+ | 功能描述:可编程振荡器 EconOscillator/Dvdr 66MHz 150mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077U-66+T&R | 制造商:Maxim Integrated Products 功能描述:ECONO-OSC 8P USOP 2-W 66MHZ T&R LF - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC ECONOSCILLATOR 66.7MHZ 8USOP 制造商:Maxim Integrated Products 功能描述:Programmable Oscillators EconOscillator/Dvdr 66MHz 150mil 2-Wire |
| DS1077U-66+T&R | 功能描述:可编程振荡器 EconOscillator/Dvdr 66MHz 150mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1077Z-100 | 功能描述:可编程振荡器 EconOscillator/Dvdr 100MHz 118mil 2-Wire RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
发布紧急采购，3分钟左右您将得到回复。