- 您现在的位置：买卖IC网 > PDF目录8928 > DS1099U-AG+T (Maxim Integrated Products)IC ECONOSCILLATOR DL 8-USOP PDF资料下载
参数资料
| 型号： | DS1099U-AG+T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 5/6页 |
| 文件大小： | 0K |
| 描述： | IC ECONOSCILLATOR DL 8-USOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 3,000 |
| 系列： | EconOscillator™ |
| 类型： | 时钟发生器 |
| PLL： | 无 |
| 输入： | 时钟 |
| 输出： | CMOS，TTL |
| 电路数： | 1 |
| 比率 - 输入:输出： | 1:2 |
| 差分 - 输入:输出： | 无/无 |
| 频率 - 最大： | 1.048MHz，16.375kHz |
| 除法器/乘法器： | 是/无 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 带卷 (TR) |
DS1099
Detailed Description
The DS1099 consists of a fixed-frequency 1.048MHz
master oscillator followed by two independent factory-
programmable dividers. The two divider outputs are
connected to pins OUT0 and OUT1, which are inde-
pendently enabled/disabled using the output-enable
pins, OE0 and OE1, respectively. When the output-
enable pins are active (low), the corresponding outputs
are enabled. If either output-enable pin is tied to its
inactive state (high), then the corresponding output is
disabled and forced high immediately. The output-
enable pins only disable the corresponding output
driver(s) and do not shut down the master oscillator or
the dividers.
Since the master oscillator frequency, fMOSC, is fixed,
the frequency of OUT0 and OUT1 is determined by
DIVIDER 0 and DIVIDER 1, respectively. And since
each output has its own divider, fOUT0 and fOUT1 can
be programmed independent of each other.
The frequency of the outputs are calculated as follows:
fOUT0 = fMOSC / 2X0 = 1.048MHz / 2X0
fOUT1 = fMOSC / 2X1 = 1.048MHz / 2X1
where X0 is the DIVIDER 0 setting and X1 is the
DIVIDER 1 setting. Valid values for X0 and X1 are inte-
gers 0 to 22 (dec).
Table 1 shows output frequencies and divider values
for the range of divider settings.
Table 1. Divider Settings and Output
Frequencies
DIVIDER SETTING
X0 OR X1
DIVISOR
fOUT0 OR fOUT1
0
1
1.048MHz
1
2
0.524MHz
2
4
0.262MHz
3
8
0.131MHz
4
16
65.50kHz
5
32
32.75kHz
———
19
524,288
2Hz
20
1,048,576
1Hz
21
2,097,152
0.5Hz
22
4,194,304
0.25Hz
Functional Diagram
GND
MASTER
OSCILLATOR
1.048MHz
DIVIDER 0
DIVIDE BY 2X
(X = X0 = 0...22)
DIVIDER 1
DIVIDE BY 2X
(X = X1 = 0...22)
VCC
OE1
OE0
OUT0
OUT1
fOUT0
fOUT1
fMOSC
FACTORY-
PROGRAMMED
EEPROM
OUTPUT
DRIVER
OUTPUT
DRIVER
DS1099
Low-Frequency Dual EconOscillator
_______________________________________________________________________________________
5
相关PDF资料 |
PDF描述 |
|---|---|
| D38999/20SE6PA | CONN RCPT 6POS WALL MNT W/PINS |
| MS3102R22-36S | CONN RCPT 8POS BOX MNT W/SCKT |
| DS1099U-WT+T | IC ECONOSCILLATOR DUAL 8USOP |
| DS1099U-PR+T | IC ECONOSCILLATOR DUAL 8USOP |
| MS27473P24B4SA | CONN PLUG 56POS STRAIGHT W/SCKT |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1099U-BC | 功能描述:可编程振荡器 Low-Frequency Dual EconOscillator RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1099U-BC/T | 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1099U-BC/W | 制造商:Maxim Integrated Products 功能描述:W-DUAL OSC 524/262 KHZ 8P USOP - Rail/Tube |
| DS1099U-BC+ | 功能描述:可编程振荡器 Low-Frequency Dual EconOscillator RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
| DS1099U-BC+T | 功能描述:可编程振荡器 Low-Frequency Dual EconOscillator RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: |
发布紧急采购，3分钟左右您将得到回复。