参数资料
型号: DS1100M-200
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: Delay Line
英文描述: SILICON DELAY LINE, TRUE OUTPUT, PDIP8
封装: 0.300 INCH, DIP-8
文件页数: 4/6页
文件大小: 154K
代理商: DS1100M-200
DS1100
4 of 6
NOTES:
1) Initial tolerances are ± with respect to the nominal value at +25°C and 5V for both leading and
trailing edge.
2) Temperature and voltage tolerance is with respect to the nominal delay value over the stated
temperature range, and a supply-voltage range of 4.75V to 5.25V.
3) All tap delays tend to vary unidirectionally with temperature or voltage changes. For example, if
TAP1 slows down, all other taps also slow down; TAP3 can never be faster than TAP2.
4) Intermediate delay values are available on a custom basis. For further information, call
(972) 371-4348.
5) All voltages are referenced to ground.
6) Measured with outputs open.
7) See Test Conditions section at the end of this data sheet.
8) Frequencies higher than 1MHz result in higher ICC values.
9) At or near maximum frequency the delay accuracy can vary and will be application sensitive (i.e.,
decoupling, layout).
Figure 3. TEST CIRCUIT
相关PDF资料
PDF描述
DS1100M-20 SILICON DELAY LINE, TRUE OUTPUT, PDIP8
DS1100M-30 SILICON DELAY LINE, TRUE OUTPUT, PDIP8
DS1100U-125 SILICON DELAY LINE, TRUE OUTPUT, PDSO8
DS1100M-50 SILICON DELAY LINE, TRUE OUTPUT, PDIP8
DS1100Z-100 SILICON DELAY LINE, TRUE OUTPUT, PDSO8
相关代理商/技术参数
参数描述
DS1100M-200+ 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube
DS1100M200N 制造商:未知厂家 制造商全称:未知厂家 功能描述:Industrial Control IC
DS1100M20N 制造商:未知厂家 制造商全称:未知厂家 功能描述:Industrial Control IC
DS1100M25 制造商:未知厂家 制造商全称:未知厂家 功能描述:Industrial Control IC
DS1100M-25 功能描述:延迟线/计时元素 RoHS:否 制造商:Micrel 功能:Active Programmable Delay Line 传播延迟时间:1000 ps 工作温度范围: 封装 / 箱体:QFN-24 封装:Tube