参数资料
| 型号： | DS1216F-3 |
| 厂商： | Maxim Integrated |
| 文件页数： | 13/15页 |
| 文件大小： | 0K |
| 描述： | IC SMART/ROM 3V 64/256/1M 32DIP |
| 标准包装： | 13 |
| 控制器类型： | Smartwatch ROM |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 封装/外壳： | 32-DIP（0.600"，15.24mm）插口 |
| 供应商设备封装： | 32-DIP 插口 |
| 包装： | 管件 |
DS1216 SmartWatch RAM/SmartWatch ROM
7 of 15
Figure 2. Reset and Memory Density Options
The RST pin on the controller has an internal pullup resistor. To disable the RST function, the trace
between pin 1 on the socket and pin 13 on the controller can be cut. In this case, the socket will ignore the
RST
input, preventing address transitions from resetting the pattern match, even if the RST bit is enabled.
On the DS1216B and DS1216D, the two VCC pins are connected together on the PC board. The switched
VCC from the controller is connected to the two VCC pins that connect to the inserted RAM. No
modifications are required if the lower density RAM is used. To use the higher density RAM, the trace by
the lower density RAM VCC pin, identified by a hash mark labeled “U,” must be cut. The two square-
metal pads, labeled “G,” must be shorted together. This disconnects switched VCC from the pin going to
the inserted RAM, and connects it to the corresponding address input pin for the higher density RAM.
NOTE: THE LETTER SUFFIX OF THE SMARTWATCH IS LOCATED ON THE PC BOARD.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1218S/T&R | IC CONTROLLER NV 8-SOIC |
| DS1222S+ | IC BANKSWITCH CMOS 16-SOIC |
| DS1260-50 | IC SMART BATTERY 500MAH 16-DIP |
| DS1267E-50 | IC POT DUAL DIGITAL 50K 20-TSSOP |
| DS1312E+ | IC CONTROLLER NV BW/RST 20-TSSOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1216H | 功能描述:存储器控制器 SmartWatch RAM RoHS:否 制造商:Maxim Integrated |
| DS1216MP000 | 制造商:Thomas & Betts 功能描述:100A,PLG,2P3W,MG,216,208V |
| DS1216MR000 | 制造商:Thomas & Betts 功能描述:100A,NLT,2P3W,MG,216,208V |
| DS1216MRA00 | 制造商:Thomas & Betts 功能描述:100A,NLT,2P3W,MG,AGL,208V |
| DS1217 | 制造商:BB 制造商全称:BB 功能描述:8-Channel, 24-Bit ANALOG-TO-DIGITAL CONVERTER |
发布紧急采购，3分钟左右您将得到回复。