- 您现在的位置：买卖IC网 > PDF目录9395 > DS1267E-10+ (Maxim Integrated Products)IC POT DUAL DIGITAL 10K 20-TSSOP PDF资料下载
参数资料
| 型号： | DS1267E-10+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/12页 |
| 文件大小： | 0K |
| 描述： | IC POT DUAL DIGITAL 10K 20-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 74 |
| 接片： | 256 |
| 电阻（欧姆）： | 10k |
| 电路数： | 2 |
| 温度系数： | 标准值 750 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | 3 线串口 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
| 产品目录页面： | 1430 (CN2011-ZH PDF) |
DS1267
4 of 12
102199
STACKED CONFIGURATION
The potentiometers of the DS1267 can be connected in series as shown in Figure 3. This is referred to as
the stacked configuration. The stacked configuration allows the user to double the total end-to-end
resistance of the part and the number of steps to 512 (or 9 bits of resolution).
The wiper output for the combined stacked potentiometer will be taken at the SOUT pin, which is the
multiplexed output of the wiper of potentiometer-0 (W0) or potentiometer-1 (W1). The potentiometer
wiper selected at the SOUT output is governed by the setting of the stack select bit (bit 0) of the 17-bit I/O
shift register. If the stack select bit has value 0, the multiplexed output, SOUT, will be that of the
potentiometer-0 wiper. If the stack select bit has value 1, the multiplexed output, SOUT, will be that of the
potentiometer-1 wiper.
STACKED CONFIGURATION Figure 3
CASCADE OPERATION
A feature of the DS1267 is the ability to control multiple devices from a single processor. Multiple
DS1267s can be linked or daisy-chained as shown in Figure 4. As a data bit is entered into the I/O shift
register of the DS1267 a bit will appear at the COUT output within a maximum delay of 50 nanoseconds.
The stack select bit of the DS1267 will always be the first out the part at the beginning of a transaction.
Additionally the COUT pin is always active regardless of the state of RST . This allows one to read the I/O
shift register without changing its value.
CASCADING MULTIPLE DEVICES Figure 4
相关PDF资料 |
PDF描述 |
|---|---|
| DS1244WP-120+ | IC NVSRAM 256KBIT 120NS 34PCM |
| DS1267E-50+ | IC POT DUAL DIGITAL 50K 20-TSSOP |
| DS1803Z-050+ | IC POT DUAL ADDRESS 50K 16-SOIC |
| MAX5494ETE+ | IC DIG POT 10BIT 16-TQFN-EP |
| DS3231M+ | IC REAL TIME CLOCK I2C 16SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1267E-10/T&R | 制造商:Maxim Integrated Products 功能描述:IC DGTL POT 10K 2CH 20TSSOP |
| DS1267E-10/T&R | 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1267E-10+ | 功能描述:数字电位计 IC Dual +/-5V RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1267E-10+T&R | 制造商:Maxim Integrated Products 功能描述:IC DGTL POT 10K 2CH 20TSSOP |
| DS1267E-10+T&R | 功能描述:数字电位计 IC Dual +/-5V RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。