- 您现在的位置：买卖IC网 > PDF目录97859 > DS12887 (DALLAS SEMICONDUCTOR) 1 TIMER(S), REAL TIME CLOCK, PDIP24 PDF资料下载
参数资料
| 型号： | DS12887 |
| 厂商： | DALLAS SEMICONDUCTOR |
| 元件分类： | Timer or RTC |
| 英文描述： | 1 TIMER(S), REAL TIME CLOCK, PDIP24 |
| 封装： | DIP-24 |
| 文件页数： | 19/19页 |
| 文件大小： | 584K |
| 代理商： | DS12887 |
DS12887
9 of 19
UPDATE–ENDED AND PERIODIC INTERRUPT RELATIONSHIP Figure 3
REGISTERS
The DS12887 has four control registers which are accessible at all times, even during the update cycle.
REGISTER A
MSB
LSB
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
UIP
DV2
DV1
DV0
RS3
RS2
RS1
RS0
UIP
The Update In Progress (UIP) bit is a status flag that can be monitored. When the UIP bit is a 1, the
update transfer will soon occur. When UIP is a 0, the update transfer will not occur for at least 244
s.
The time, calendar, and alarm information in RAM is fully available for access when the UIP bit is 0. The
UIP bit is read only and is not affected by RESET . Writing the SET bit in Register B to a 1 inhibits any
update transfer and clears the UIP status bit.
DV0, DV1, DV2
These 3 bits are used to turn the oscillator on or off and to reset the countdown chain. A pattern of 010 is
the only combination of bits that will turn the oscillator on and allow the RTC to keep time. A pattern of
11X will enable the oscillator but holds the countdown chain in reset. The next update will occur at 500
ms after a pattern of 010 is written to DV0, DV1, and DV2.
RS3, RS2, RS1, RS0
These four rate–selection bits select one of the 13 taps on the 15–stage divider or disable the divider
output. The tap selected can be used to generate an output square wave (SQW pin) and/or a periodic
interrupt. The user can do one of the following:
1. Enable the interrupt with the PIE bit;
2. Enable the SQW output pin with the SQWE bit;
3. Enable both at the same time and the same rate; or
4. Enable neither.
Table 1 lists the periodic interrupt rates and the square wave frequencies that can be chosen with the RS
bits. These four read/write bits are not affected by RESET .
相关PDF资料 |
PDF描述 |
|---|---|
| DS1302S | 0 TIMER(S), REAL TIME CLOCK, PDSO8 |
| DS1302N | 0 TIMER(S), REAL TIME CLOCK, PDIP8 |
| DS1302SN | 0 TIMER(S), REAL TIME CLOCK, PDSO8 |
| DS1302 | 0 TIMER(S), REAL TIME CLOCK, PDIP8 |
| DS1302Z | 0 TIMER(S), REAL TIME CLOCK, PDSO8 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS12887+ | 功能描述:实时时钟 RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS12887A | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS12887A+ | 功能描述:实时时钟 RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1290 | 功能描述:计数器移位寄存器 RoHS:否 制造商:Texas Instruments 计数器类型: 计数顺序:Serial to Serial/Parallel 电路数量:1 封装 / 箱体:SOIC-20 Wide 逻辑系列: 逻辑类型: 输入线路数量:1 输出类型:Open Drain 传播延迟时间:650 ns 最大工作温度:+ 125 C 最小工作温度:- 40 C 封装:Reel |
| DS12C887 | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。