- 您现在的位置：买卖IC网 > PDF目录19923 > DS1312S+T&R (Maxim Integrated)IC CONTROLLER NV BW/RST 16-SOIC PDF资料下载
参数资料
| 型号： | DS1312S+T&R |
| 厂商： | Maxim Integrated |
| 文件页数： | 6/12页 |
| 文件大小： | 0K |
| 描述： | IC CONTROLLER NV BW/RST 16-SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1,000 |
| 控制器类型： | 非易失性 RAM |
| 电源电压： | 4.75 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 带卷 (TR) |
DS1312
3 of 12
battery. Should BW not deactivate for this reason, the new battery can be detached for tBDBA and then re-
attached to clear BW .
NOTE: The DS1312 cannot constantly monitor an attached battery because such monitoring would
drastically reduce the life of the battery. As a result, the DS1312 only tests the battery for one second out
of every 24 hours and does not monitor the battery in any way between tests. If a good battery (one that
has not been previously flagged with BW ) is removed between battery tests, the DS1312 may not
immediately sense the removal and may not activate BW until the next scheduled battery test. If a battery
is then reattached to the DS1312, the battery may not be tested until the next scheduled test.
NOTE: Battery monitoring is only a useful technique when testing can be done regularly over the entire
life of a lithium battery. Because the DS1312 only performs battery monitoring when VCC is nominal,
systems which are powered-down for excessively long periods can completely drain their lithium cells
without receiving any advanced warning. To prevent such an occurrence, systems using the DS1312
battery monitoring feature should be powered–up periodically (at least once every few months) in order
to perform battery testing. Furthermore, anytime BW is activated on the first battery test after a power-up,
data integrity should be checked via checksum or other technique.
POWER MONITORING
DS1312S and DS1312E varieties have an additional reset pin. These varieties detect out-of-tolerance
power supply conditions and warn a processor-based system of impending power failure. When VCCI falls
below the trip point level defined by the TOL pin (VCCTP), the VCCI comparator activates the reset signal
RST
. Reset occurs in the range of 4.75 to 4.5 volts (5% tolerance) when the TOL pin is connected to
GND or in the range of 4.5 to 4.25 volts (10% tolerance) when TOL is connected to VCCO.
RST
also serves as a power-on reset during power-up. After VCCI exceeds VCCTP, RST will be held active
for 200 ms nominal (tRPU). This reset period is sufficiently long to prevent system operation during
power-on transients and to allow tREC to expire. RST has an open-drain output driver.
FRESHNESS SEAL MODE
When the battery is first attached to the DS1312 without VCC power applied, the device does not
immediately provide battery-backup power on VCCO. Only after VCCI exceeds VCCTP will the DS1312
leave Freshness Seal Mode. This mode allows a battery to be attached during manufacturing but not used
until after the system has been activated for the first time. As a result, no battery energy is drained during
storage and shipping.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1314+ | IC CTRLR NV W/BATT MON 8-DIP |
| GRM188R72E221KW07D | CAP CER 220PF 250V 10% X7R 0603 |
| V24C8H100BF | CONVERTER MOD DC/DC 8V 100W |
| V24C8H100BL3 | CONVERTER MOD DC/DC 8V 100W |
| LT4256-1IS8#TR | IC CTRLR HOTSWAP HV LATCH 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS-1313HZ-B | 制造商:Hikvision USA 功能描述:Box Camera Housing with Wall Bracket and Fan/Heater 制造商:HIKVISION 功能描述:BOX CAMERA HOUSING +FAN/HTR INCLUDES DS-1213ZJ WALL BRACKE |
| DS1314 | 功能描述:IC CTRLR NV W/BATT MON 3V 8-DIP RoHS:否 类别:集成电路 (IC) >> 存储器 - 控制器 系列:- 标准包装:45 系列:- 控制器类型:静态 RAM（SRAM） 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| DS1314_05 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:3V Nonvolatile Controller with Lithium Battery Monitor |
| DS1314+ | 功能描述:IC CTRLR NV W/BATT MON 8-DIP RoHS:是 类别:集成电路 (IC) >> 存储器 - 控制器 系列:- 标准包装:45 系列:- 控制器类型:静态 RAM（SRAM） 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
| DS1314E | 功能描述:IC CTRL NV W/BATT MON 3V 20TSSOP RoHS:否 类别:集成电路 (IC) >> 存储器 - 控制器 系列:- 标准包装:45 系列:- 控制器类型:静态 RAM（SRAM） 电源电压:4.5 V ~ 5.5 V 工作温度:0°C ~ 70°C 封装/外壳:16-SOIC（0.295"，7.50mm 宽） 供应商设备封装:16-SOIC W 包装:管件 |
发布紧急采购，3分钟左右您将得到回复。