- 您现在的位置：买卖IC网 > PDF目录9370 > DS1338Z-18+T&R (Maxim Integrated Products)IC RTC 56BYTE NV RAM 1.8V 8-SOIC PDF资料下载
参数资料
| 型号： | DS1338Z-18+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 4/16页 |
| 文件大小： | 0K |
| 描述： | IC RTC 56BYTE NV RAM 1.8V 8-SOIC |
| 标准包装： | 2,500 |
| 类型： | 时钟/日历 |
| 特点： | 闰年，NVSRAM，方波输出 |
| 存储容量： | 56B |
| 时间格式： | HH:MM:SS（12/24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.71 V ~ 5.5 V |
| 电压 - 电源，电池： | 1.3 V ~ 3.7 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
DS1338 I2C RTC with 56-Byte NV RAM
12 of 16
I2C SERIAL DATA BUS
The DS1338 supports the I2C protocol. A device that sends data onto the bus is defined as a transmitter and a
device receiving data is a receiver. The device that controls the message is called a master. The devices that are
controlled by the master are referred to as slaves. The bus must be controlled by a master device, which generates
the serial clock (SCL), controls the bus access, and generates the START and STOP conditions. The DS1338
operates as a slave on the I2C bus. Within the bus specifications, a standard mode (100kHz maximum clock rate)
and a fast mode (400kHz maximum clock rate) are defined. The DS1338 works in both modes. Connections to the
bus are made through the open-drain I/O lines SDA and SCL.
The following bus protocol has been defined (Figure 5).
Data transfer can be initiated only when the bus is not busy.
During data transfer, the data line must remain stable whenever the clock line is HIGH. Changes in the data
line while the clock line is HIGH are interpreted as control signals.
Accordingly, the following bus conditions have been defined:
Bus not busy: Both data and clock lines remain HIGH.
Start data transfer: A change in the state of the data line, from HIGH to LOW, while the clock is HIGH, defines a
START condition.
Stop data transfer: A change in the state of the data line, from LOW to HIGH, while the clock line is HIGH, defines
the STOP condition.
Data valid: The state of the data line represents valid data when, after a START condition, the data line is stable
for the duration of the HIGH period of the clock signal. The data on the line must be changed during the LOW
period of the clock signal. There is one clock pulse per bit of data.
Each data transfer is initiated with a START condition and terminated with a STOP condition. The number of data
bytes transferred between START and STOP conditions is not limited and is determined by the master device. The
information is transferred byte-wise and each receiver acknowledges with a ninth bit.
Acknowledge: Each receiving device, when addressed, is obliged to generate an acknowledge after the reception
of each byte. The master device must generate an extra clock pulse that is associated with this acknowledge bit.
A device that acknowledges must pull down the SDA line during the acknowledge clock pulse in such a way that
the SDA line is stable LOW during the HIGH period of the acknowledge-related clock pulse. Of course, setup and
hold times must be taken into account. A master must signal an end of data to the slave by not generating an
acknowledge bit on the last byte that has been clocked out of the slave. In this case, the slave must leave the data
line HIGH to enable the master to generate the STOP condition.
Figure 5. Data Transfer on I2C Serial Bus
相关PDF资料 |
PDF描述 |
|---|---|
| GTC06CF-20-22P | CONN PLUG 6POS STRAIGHT W/PINS |
| DS1340Z-33+T&R | IC RTC I2C W/CHARGER 3.3V 8-SOIC |
| DS1340Z-3+T&R | IC RTC I2C W/CHARGER 3V 8-SOIC |
| VI-J6J-MZ | CONVERTER MOD DC/DC 36V 25W |
| VE-263-MX-B1 | CONVERTER MOD DC/DC 24V 75W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1338Z-3 | 功能描述:实时时钟 I2C Serial RTC w/56 Byte NV RAM RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1338Z-3/T&R | 功能描述:实时时钟 I2C Serial RTC w/56 Byte NV RAM RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1338Z-3+ | 功能描述:实时时钟 I2C Serial RTC w/56 Byte NV RAM RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1338Z-3+T&R | 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK SERL 56BYTE 8SOIC - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC RTC 56BYTE NV RAM 3V 8-SOIC 制造商:Maxim Integrated Products 功能描述:Real Time Clock I2C Serial RTC w/56 Byte NV RAM |
| DS1338Z-3+T&R | 功能描述:实时时钟 I2C Serial RTC w/56 Byte NV RAM RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。