参数资料
| 型号： | DS1339C-2# |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 16/20页 |
| 文件大小： | 0K |
| 描述： | IC RTC I2C W/ALARM 16-SOIC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 45 |
| 类型： | 时钟/日历 |
| 特点： | 警报器，闰年，方波输出，涓流充电器 |
| 时间格式： | HH:MM:SS（12/24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.8 V ~ 2.2 V |
| 电压 - 电源，电池： | 1.3 V ~ 3.7 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 16-SOIC（0.295"，7.50mm 宽） |
| 供应商设备封装： | 16-SOIC W |
| 包装： | 管件 |
DS1339 I
2C Serial Real-Time Clock
5 of 20
POWER-UP/DOWN CHARACTERISTICS
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
Recovery at Power-Up
tREC
(Note 16)
2
ms
VCC Fall Time; VPF(MAX) to VPF(MIN)
tVCCF
300
s
VCC Rise Time; VPF(MIN) to VPF(MAX)
tVCCR
0
s
WARNING: Under no circumstances are negative undershoots, of any amplitude, allowed when device is in
battery-backup mode.
Note 2:
Limits at -40°C are guaranteed by design and are not production tested.
Note 3:
SCL only.
Note 4:
SDA and SQW/
INT.
Note 5:
ICCA—SCL at fSC max, VIL = 0.0V, VIH = VCC, trickle charger disabled.
Note 6:
Specified with the I
2C bus inactive, V
IL = 0.0V, VIH = VCC, trickle charger disabled.
Note 7:
VCC must be less than 3.63V if the 250 resistor is selected.
Note 8:
Using recommended crystal on X1 and X2.
Note 9:
Guaranteed by design; not production tested.
Note 10:
After this period, the first clock pulse is generated.
Note 11:
A device must internally provide a hold time of at least 300ns for the SDA signal (referred to the VIHMIN of the SCL signal) to bridge
the undefined region of the falling edge of SCL.
Note 12:
The maximum tHD:DAT need only be met if the device does not stretch the LOW period (tLOW) of the SCL signal.
Note 13:
A fast-mode device can be used in a standard-mode system, but the requirement tSU:DAT ≥ to 250ns must then be met. This is
automatically the case if the device does not stretch the LOW period of the SCL signal. If such a device does stretch the LOW
period of the SCL signal, it must output the next data bit to the SDA line tR(MAX) + tSU:DAT = 1000 + 250 = 1250ns before the SCL line
is released.
Note 14:
CB—total capacitance of one bus line in pF.
Note 15:
The parameter tOSF is the period of time the oscillator must be stopped for the OSF flag to be set over the voltage range of 0.0V ≤
VCC ≤ VCCMAX and 1.3V ≤ VBACKUP ≤ 3.7V.
Note 16:
This delay applies only if the oscillator is running. If the oscillator is disabled or stopped, no power-up delay occurs.
Figure 1. Power-Up/Down Timing
OUTPUTS
VCC
V
PF(MAX)
V
PF(MIN)
INPUTS
HIGH-Z
DON'T CARE
VALID
RECOGNIZED
VALID
t
VCCF
t
VCCR
t
REC
相关PDF资料 |
PDF描述 |
|---|---|
| DS1340Z-33/T&R | IC RTC I2C W/CHARGER 3.3V 8-SOIC |
| DS1340Z-3 | IC RTC I2C W/CHARGER 3V 8-SOIC |
| DS1341T+ | IC RTC I2C W/ALARM 6TDFN-EP |
| DS1344D-33+ | IC RTC SPI 3.3V 14TDFN-EP |
| DS1347T+ | IC RTC/CALENDAR SPI 8TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1339C-2# | 功能描述:实时时钟 I2C Serial RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1339C-2+ | 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK SERL 16SOIC W - Bulk |
| DS1339C-3 | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1339C-3- | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:I2C Serial Real-Time Clock |
| DS1339C-3# | 功能描述:实时时钟 I2C Serial RTC RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。