参数资料
型号: DS1347T+
厂商: Maxim Integrated Products
文件页数: 16/17页
文件大小: 0K
描述: IC RTC/CALENDAR SPI 8TDFN
产品培训模块: Obsolescence Mitigation Program
标准包装: 1
类型: 时钟/日历
特点: 警报器,闰年,SRAM
时间格式: HH:MM:SS(12/24 小时)
数据格式: YY-MM-DD-dd
接口: SPI
电源电压: 2 V ~ 5.5 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 8-WDFN 裸露焊盘
供应商设备封装: 8-TDFN EP
包装: 管件
Low-Current, SPI-Compatible
Real-Time Clock
8
Maxim Integrated
DS1347
ADDRESS
BIT 7
BIT 6
BIT 5
BIT 4
BIT 3
BIT 2
BIT 1
BIT 0
FUNCTION
RANGE
57h
X
RAM 11
00h–FFh
59h
X
RAM 12
00h–FFh
5Bh
X
RAM 13
00h–FFh
5Dh
X
RAM 14
00h–FFh
5Fh
X
RAM 15
00h–FFh
61h
X
RAM 16
00h–FFh
63h
X
RAM 17
00h–FFh
65h
X
RAM 18
00h–FFh
67h
X
RAM 19
00h–FFh
69h
X
RAM 20
00h–FFh
6Bh
X
RAM 21
00h–FFh
6Dh
X
RAM 22
00h–FFh
6Fh
X
RAM 23
00h–FFh
71h
X
RAM 24
00h–FFh
73h
X
RAM 25
00h–FFh
75h
X
RAM 26
00h–FFh
77h
X
RAM 27
00h–FFh
79h
X
RAM 28
00h–FFh
7Bh
X
RAM 29
00h–FFh
7Dh
X
RAM 30
00h–FFh
7Fh
See the Data Input (Burst Write) section.
RAM Burst
Table 1. Register Map (continued)
Command and Control
Address/Command Byte
Each data transfer into or out of the device is initiated by
an address/command byte. The address/command byte
specifies which registers are to be accessed, and if the
access is a read or a write. Table 1 shows the
address/command bytes and their associated regis-
ters, and lists the hex codes for all read and write oper-
ations. The address/command bytes are input MSB
(bit 7) first. Bit 7 specifies a write (logic 0) or read
(logic 1). Bit 6 specifies register data (logic 0) or RAM
data (logic 1). Bits 5–1 specify the designated register
to be written or read. The LSB (bit 0) must be logic 1. If
the LSB is a zero, writes to the device are disabled.
Clock Burst Mode
Sending the clock burst address/command (3Fh) spec-
ifies burst-mode operation. In this mode, multiple bytes
are read or written after a single address/command.
The first seven clock/calendar registers (Seconds,
Minutes, Hours, Date, Month, Day, and Year) and the
Control register are consecutively read or written, start-
ing with the MSB of the Seconds register. When writing
to the clock registers in burst mode, all seven clock/cal-
endar registers and the Control register must be written
in order for the data to be transferred. See the
Example:
Setting the Clock with a Burst Write section.
RAM Burst Mode
Sending the RAM burst address/command (7Fh) speci-
fies burst-mode operation. In this mode, the 31 RAM
locations can be consecutively read or written, starting
at 41h. When writing to RAM in burst mode, it is not
necessary to write all 31 bytes for the data to transfer;
each complete byte written is transferred to RAM. When
reading from RAM, data is output until all 31 bytes have
been read, or until CS is driven high.
0 = Reads as logic 0, 1 = Reads as logic 1, X = Don’t care.
相关PDF资料
PDF描述
DS1371U+C01 IC BINARY COUNTER 32-BIT 8-USOP
DS1372U+T&R IC BINARY COUNTER 32-BIT 8-USOP
DS1374C-3# IC RTC I2C W/CHARGER 16-SOIC
DS1375T+ IC RTC SERIAL W/ALARM 6-TDFN
DS1384FP-12+ IC CTRLR RTC WDOG 120NS 44-MQFP
相关代理商/技术参数
参数描述
DS1347T+ 功能描述:实时时钟 Low Power SPI RTC For 12.5Pf Crystal RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
DS1347T+T&R 制造商:Maxim Integrated Products 功能描述:LOW POWER SPI RTC FOR 12.5PF CRYSTA - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC RTC/CALENDAR SPI 8TDFN 制造商:Maxim Integrated Products 功能描述:Real Time Clock Low Power SPI RTC For 12.5Pf Crystal
DS1347T+T&R 功能描述:实时时钟 Low Power SPI RTC For 12.5Pf Crystal RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
DS135 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:1.0A Power Rectifier
DS1350AB 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:4096k Nonvolatile SRAM with Battery Monitor