- 您现在的位置：买卖IC网 > PDF目录9412 > DS1371U+ (Maxim Integrated Products)IC BINARY COUNTER 32-BIT 8-USOP PDF资料下载
参数资料
| 型号： | DS1371U+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/15页 |
| 文件大小： | 0K |
| 描述： | IC BINARY COUNTER 32-BIT 8-USOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 类型： | 二进制计数器 |
| 特点： | 警报器，方波输出，监视计时器 |
| 时间格式： | 二进制 |
| 数据格式： | 二进制 |
| 接口： | I²C，2 线串口 |
| 电源电压： | 1.7 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 管件 |
| 产品目录页面： | 1433 (CN2011-ZH PDF) |
DS1371
10 of 15
Special Purpose Registers
The DS1371 has two additional registers (07h–08h) that control the WD/
ALM counter, square-wave
output, and interrupts.
Control Register (07h)
Bit #
7
6
5
4
3
2
1
0
Name
EOSC
WACE
WD/
ALM
0
INTCN
RS2
RS1
AIE
Default
0
1
0
Bit 7: Enable Oscillator (
EOSC). When set to logic 0, the oscillator is started. When set to logic 1, the
oscillator is stopped. When this bit is set to a logic 1, the oscillator is stopped and the DS1371 is placed
into a low-power standby mode (IDDR). This bit is clear (logic 0) when power is first applied.
Bit 6: WD/
ALM Counter Enable (WACE). When set to logic 1, the WD/ALM counter is enabled.
When set to logic 0, the WD/
ALM counter is disabled, and the 24-bits can be used as general-purpose
RAM. This bit is clear (logic 0) when power is first applied.
Bit 5: WD/
ALM Counter Select (WD/ALM). When set to logic 0, the counter decrements every second
until it reaches 0 and is then reloaded and restarted. When set to logic 1, the WD/
ALM counter
decrements every 1/4096 of a second (approximately every 244μs) until it reaches 0, sets the AF bit in the
status register, and stops. If any of the WD/
ALM counter registers are read or written, or a rising edge on
the WDS pin occurs before the counter reaches 0, the counter is reloaded and restarted. This bit is clear
(logic 0) when power is first applied.
Bit 3: Interrupt Control (INTCN). This bit controls the SQW/
INT signal. When the INTCN bit is set to
logic 0, a square wave is output on the SQW/
INT pin whose frequency is defined by bits RS2 and RS1.
The oscillator must also be enabled for the square wave to be output. When the INTCN bit is set to logic
1, then this permits the alarm flag bit in the status register to assert SQW/
INT (provided that the alarm is
also enabled). The alarm flag is always set, regardless of the state of the INTCN bit. The INTCN bit is set
to logic 0 when power is first applied.
Bits 2 and 1: Rate Select 1 and 2 (RS2 and RS1). These bits control the frequency of the square-wave
output when the square wave has been enabled. Table 3 shows the square-wave frequencies that can be
selected with the RS bits. These bits are both set (logic 1) when power is first applied.
Bit 0: Alarm Interrupt Enable (AIE). When set to logic 1, this bit permits the AF bit in the status
register to assert SQW/
INT (when INTCN = 1). When set to logic 0 or INTCN is set to logic 0, the AF bit
does not initiate the SQW/
INT signal. If the WD/ALM bit is set to a logic 1 and the AF flag is set, writing
AIE to a 0 does not truncate the 250ms pulse on the SQW/
INT pin. The AIE bit is at logic 0 when power
is first applied.
Table 3. SQW/
INT Operating Modes
WACE
WD/
ALM
INTCN
AIE
RS2
RS1
SQW/
INT OUTPUT
X
0
X
0
1Hz
X
0
X
0
1
4.096kHz
X
0
X
1
0
8.192kHz
X
0
X
1
32.768kHz
1
0
1
X
Alarm
1
X
WD
相关PDF资料 |
PDF描述 |
|---|---|
| VE-J7L-MZ | CONVERTER MOD DC/DC 28V 25W |
| MS27484E12A35PB | CONN PLUG 22POS STRAIGHT W/PINS |
| VE-J7K-MZ | CONVERTER MOD DC/DC 40V 25W |
| VI-22N-MX-B1 | CONVERTER MOD DC/DC 18.5V 75W |
| MCP4019T-503E/LT | IC DGTL POT 50K 128TAPS SC70-5 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1371U/C01 | 制造商:Maxim Integrated Products 功能描述:SERIAL RTC USOP DEXCOM - Rail/Tube |
| DS1371U/T&R | 功能描述:实时时钟 I2C 32 bit Binary Counter RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1371U+ | 功能描述:实时时钟 I2C 32 bit Binary Counter RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1371U+ | 制造商:Maxim Integrated Products 功能描述:IC 32BIT BINARY COUNTER W/DOG CLK ?SOP-8 |
| DS1371U+C01 | 功能描述:实时时钟 I2C 32 bit Binary Counter RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。