参数资料
型号: DS1391U-33
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: XO, clock
英文描述: Low-Voltage SPI/3-Wire RTCs with Trickle Charger
中文描述: 1 TIMER(S), REAL TIME CLOCK, PDSO10
封装: MO-187CBA, MICRO, SOP-10
文件页数: 21/24页
文件大小: 742K
代理商: DS1391U-33
3-Wire Serial-Data Bus
The DS1392/DS1393 provide a 3-wire serial-data bus,
and support both single-byte and multiple-byte data
transfers for maximum flexibility. The I/O pin is the seri-
al-data input/output pin. The CE input is used to initiate
and terminate a data transfer. The SCLK pin is used to
synchronize data movement between the master
(microcontroller) and the slave (DS1392/DS1393)
devices. Input data is latched on the SCLK rising edge
and output data is shifted out on the SCLK falling edge.
There is one clock for each bit transferred. Address
and data bits are transferred in groups of eight.
Address and data bytes are shifted LSB first into the
I/O pin. Data is transferred out LSB first on the I/O pin
for a read operation.
The address byte is always the first byte entered after
CE is driven high. The MSB (W/
R
) of this byte deter-
mines if a read or write takes place. If W/
R
is 0, one or
more read cycles occur. If W/
R
is 1, one or more write
cycles occur.
Data transfers can be one byte at a time or in multiple-
byte burst mode. After CE is driven high, an address is
written to the DS1392/DS1393. After the address, one
or more data bytes can be written or read. For a single-
byte transfer, one byte is read or written and then CE is
driven low (Figure 14 and 15). For a multiple-byte trans-
fer, however, multiple bytes can be read or written after
the address has been written (Figure 16). Each read or
write cycle causes the RTC register address to auto-
matically increment. Incrementing continues until the
device is disabled. The address wraps to 00h after
incrementing to 0Fh (during a read) and wraps to 80h
after incrementing to 8Fh (during a write). Note, howev-
er, that an updated copy of the time is only loaded into
the user-accessible copy upon the rising edge of CE.
Reading the RTC registers in a continuous loop does
not show the time advancing.
Chip Information
TRANSISTOR COUNT: 11,525
PROCESS: CMOS
SUBSTRATE CONNECTED TO GROUND
Thermal Information
Theta-JA: 180°C/W
Theta-JC: 41.9°C/W
D
Low-Voltage SPI/3-Wire RTCs with
Trickle Charger
____________________________________________________________________
21
CE
SCLK
I/O
ADDRESS
BYTE
DATA
BYTE 0
DATA
BYTE 1
DATA
BYTE N
Figure 16. 3-Wire Multiple-Byte Burst Transfer
相关PDF资料
PDF描述
DS1390U-3 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
DS1390U-33 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
DS1391U-18 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
DS1392U-18 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
DS1392U-3 Low-Voltage SPI/3-Wire RTCs with Trickle Charger
相关代理商/技术参数
参数描述
DS1391U-33/T&R 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
DS1391U-33+ 功能描述:实时时钟 Low-V SPI/3-Wire With Trickle Charger RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
DS1391U-33+T&R 制造商:Maxim Integrated Products 功能描述:DS1391U-33 T&R RTC 3.3V USOP PB-FRE 制造商:Maxim Integrated Products 功能描述:REAL TIME CLOCK SERL 10PIN UMAX - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC RTC W/CHARGER 10-USOP 制造商:Maxim Integrated Products 功能描述:Real Time Clock Low-V SPI/3-Wire With Trickle Charger
DS1391U-33+T&R 功能描述:实时时钟 Low-V SPI/3-Wire With Trickle Charger RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube
DS1392 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Low-Voltage SPI/3-Wire RTCs with Trickle Charger