- 您现在的位置：买卖IC网 > PDF目录295503 > DS1543W-120 (MAXIM INTEGRATED PRODUCTS INC) 0 TIMER(S), REAL TIME CLOCK, PDIP28 PDF资料下载
参数资料
| 型号： | DS1543W-120 |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | XO, clock |
| 英文描述： | 0 TIMER(S), REAL TIME CLOCK, PDIP28 |
| 封装： | 0.700 INCH, EXTENDED, DIP-28 |
| 文件页数： | 8/17页 |
| 文件大小： | 199K |
| 代理商： | DS1543W-120 |
DS1543
16 of 17
AC TEST CONDITIONS
Output Load:
100 pF + 1TTL Gate
Input Pulse Levels:
0.0 to 3.0V
Timing Measurement Reference Levels:
Input: 1.5V
Output: 1.5V
Input Pulse Rise and Fall Times: 5 ns
NOTES:
1. Voltage referenced to ground.
2. Typical values are at 25
°C and nominal supplies.
3. Outputs are open.
4. Battery switch over occurs at the lower of either the battery voltage or VPF.
5. The IRQ /FT and RST outputs are open-drain.
6. Data retention time is at 25
°C.
7. Each DS1543 has a built-in switch that disconnects the lithium source until VCC is first applied by the
user. The expected tDR is defined for DIP modules as a cumulative time in the absence of VCC starting
from the time power is first applied by the user.
8. Real Time Clock Modules (DIP) can be successfully processed through conventional wave-soldering
techniques as long as temperature exposure to the lithium energy source contained within does not
exceed +85
°C. Post-solder cleaning with water washing techniques is acceptable, provided that
ultrasonic vibration is not used.
In addition, for the PowerCap:
a. Dallas Semiconductor recommends that PowerCap Module bases experience one pass through solder
reflow oriented with the label side up (“live - bug”).
b. Hand Soldering and touch-up: Do not touch or apply the soldering iron to leads for more than
3 seconds. To solder, apply flux to the pad, heat the lead frame pad and apply solder. To remove the
part, apply flux, heat the lead frame pad until the solder reflow and use a solder wick to remove
solder.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1644L-15 | 0 TIMER(S), REAL TIME CLOCK, DSO34 |
| DS1706RESA+T&R | 3.3 and 5.0 Volt MicroMonitor |
| DS1706REUA+T&R | 3.3 and 5.0 Volt MicroMonitor |
| DS1706SESA+T&R | 3.3 and 5.0 Volt MicroMonitor |
| DS1706SEUA+T&R | 3.3 and 5.0 Volt MicroMonitor |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1543W-120+ | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1543W-150 | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1543W-150+ | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1543W-200 | 功能描述:实时时钟 RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1543W-70 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:64k NV Timekeeping RAM |
发布紧急采购，3分钟左右您将得到回复。