- 您现在的位置：买卖IC网 > PDF目录21988 > DS1631U (Maxim Integrated)IC THERMOMETER DIG HI-PREC 8MSOP PDF资料下载
参数资料
| 型号： | DS1631U |
| 厂商： | Maxim Integrated |
| 文件页数： | 10/16页 |
| 文件大小： | 435K |
| 描述： | IC THERMOMETER DIG HI-PREC 8MSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 功能： | 温度计，恒温计 |
| 传感器类型： | 内部 |
| 感应温度： | -55°C ~ 125°C |
| 精确度： | ±2°C（最小值） |
| 拓扑： | ADC（三角积分型），比较器，寄存器库 |
| 输出类型： | I²C?/SMBus? |
| 输出警报： | 是 |
| 输出风扇： | 无 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 管件 |
DS1631/DS1631A/DS1731
10 of 15
Table 5. CONFIGURATION REGISTER BIT DESCRIPTIONS
BIT NAME
(USER ACCESS)
FUNCTIONAL DESCRIPTION
DONETemperature
Conversion Done
(Read Only)
Power-up state = 1.
DONE = 0. Temperature conversion is in progress.
DONE = 1. Temperature conversion is complete.
THFTemperature High Flag
(Read/Write)
Power-up state = 0.
THF = 0. The measured temperature has not exceeded the value
stored in the T
H
register since power-up.
THF = 1. At some point since power-up the measured temperature
has been higher than the value stored in the T
H
register. THF remains
a 1 until it is overwritten with a 0 by the user, the power is cycled, or
a Software POR command is issued.
TLFTemperature Low Flag
(Read/Write)
Power-up state = 0.
TLF = 0. The measured temperature has not been lower than the
value stored in the T
L
register since power-up.
TLF = 1. At some point since power-up the measured temperature
has been lower than the value stored in the T
L
register. TLF remains a
1 until it is overwritten with a 0 by the user, the power is cycled, or a
Software POR command is issued.
NVBNV Memory Busy
(Read Only)
Power-up state = 0.
NVB = 1. A write to EEPROM memory is in progress.
NVB = 0. NV memory is not busy.
R1Resolution Bit 1
(Read/Write)
Power-up state = 1.
Sets conversion, T
H
, and T
L
resolution (see Table 6).
R0Resolution Bit 0
(Read/Write)
Power-up state = 1.
Sets conversion, T
H
, and T
L
resolution (see Table 6).
POL*T
OUT
Polarity
(Read/Write)
Power-up state = last value written to this bit. Factory setting = 0.
POL = 1. T
OUT
is active high.
POL = 0. T
OUT
is active low.
1SHOT*Conversion Mode
(Read/Write)
Power-up state = last value written to this bit. Factory setting = 0.
1SHOT = 1. One-Shot Mode. The Start Convert T command initiates
a single temperature conversion and then the device goes into a low-
power standby state.
1SHOT = 0. Continuous Conversion Mode. The Start Convert T
command initiates continuous temperature conversions.
*Stored in EEPROM
Table 6. RESOLUTION CONFIGURATION
R1
R0
RESOLUTION
(BIT)
CONVERSION TIME
(MAX)
0
0
9
93.75ms
0
1
10
187.5ms
1
0
11
375ms
1
1
12
750ms
相关PDF资料 |
PDF描述 |
|---|---|
| XC2S150-5PQG208C | IC SPARTAN-II FPGA 150K 208-PQFP |
| TACR685K010R | CAP TANT 6.8UF 10V 10% 0805 |
| GMC43DRAS-S734 | CONN EDGECARD 86POS .100 R/A SLD |
| AMC18DRYS-S734 | CONN EDGECARD 36POS DIP .100 SLD |
| FMC10DREN-S13 | CONN EDGECARD 20POS .100 EXTEND |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1631U/T&R | 制造商:Maxim Integrated Products 功能描述:0.5C 12C TEMP SENSOR MSOP T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERMOMETER DIG HI-PREC 8MSOP |
| DS1631U/T&R | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1631U/TR | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:High-Precision Digital Thermometer and Thermostat |
| DS1631U+ | 功能描述:板上安装温度传感器 Digital Thermometer & Thermostat RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1631U+T&R | 制造商:Maxim Integrated Products 功能描述:TEMP SENSOR DGTL 2-WIRE 8USOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERMOMETER DIG HI-PREC 8MSOP |
发布紧急采购，3分钟左右您将得到回复。