参数资料
| 型号： | DS1677E |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 18/18页 |
| 文件大小： | 0K |
| 描述： | IC CTRLR SYSTEM PORT 20-TSSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 74 |
| 类型： | 便携系统控制器 |
| 特点： | 警报器，闰年，监视计时器 |
| 时间格式： | HH:MM:SS（12/24 小时） |
| 数据格式： | YY-MM-DD-dd |
| 接口： | 3 线串口 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电压 - 电源，电池： | 2.5 V ~ 3.7 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-TSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-TSSOP |
| 包装： | 管件 |
DS1677
9 of 18
ANALOG-TO-DIGITAL CONVERTER
The DS1677 provides a 3-channel 8-bit analog-to-digital converter. The A/D reference voltage (2.55V
typical) is derived from an on-chip band-gap circuit. Three multiplexed analog inputs are provided
through the AIN0, AIN1, and AIN2 pins. The ADC is monotonic (no missing codes) and uses a
successive approximation technique to convert the analog signal into a digital code.
An A/D conversion is the process of assigning a digital code to an analog input voltage. This code
represents the input value as a fraction of the full-scale voltage (FSV) range. Thus, the FSV range is then
divided by the ADC into 256 codes (8 bits). The FSV range is bounded by an upper limit equal to the
reference voltage and the lower limit, which is ground. The DS1677 has a FSV of 2.55V (typical) that
provides a resolution of 10mV. An input voltage equal to the reference voltage converts to FFh while an
input voltage equal to ground converts to 00h. The relative linearity of the ADC is
0.5 LSB.
The ADC selects from one of three different analog inputs (AIN0–AIN2). The input that is selected is
determined by the Analog Input Select (AIS) bits in the Control Register. Table 2 lists the specific analog
input that is selected by these 2 bits. Note also that the converter can be turned off by these bits to reduce
power. When the ADC is turned on by setting AIS0 and AIS1 to any value other than 0,0 the analog input
voltage is converted and written to the ADC Register within 488
s. An internal analog filter at the input
reduces high frequency noise. Subsequent updates occur approximately every 10ms. If AIS0 and/or AIS1
are changed, updates will occur at the next 10ms conversion time.
The Conversion Update In Progress (CU) bit in the Status Register indicates when the ADC Register can
be read. When this bit is a one, an update to the ADC Register will occur within 488
s maximum.
However, when this bit is zero an update will not occur for at least 244
s. The CU bit should be polled
before reading the ADC Register to insure that the contents are stable during a read cycle. Once a read
cycle to the ADC Register has been started, the DS1677 will not update that register until the read cycle
has been completed. It should also be mentioned that taking CS low will abort the read cycle and will
allow the ADC Register to be updated.
Figure 5 illustrates the timing of the CU bit relative to an instruction to begin conversion and the
completion of that conversion.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1678S/T&R | IC RECORDER REALTIME EVENT 8SOIC |
| DS1682S | IC TIMEKEEPER ALARM ELAPSE 8SOIC |
| DS1683S+T&R | IC REAL TIME EVENT REC 8SOIC |
| DS1685EN-5/T&R | IC RTC 5V 64BIT Y2K IND 24TSSOP |
| DS1688S+ | IC RTC W/NV RAM CTRL 28-SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1677E+ | 功能描述:实时时钟 Portable System Controller RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1677E-5 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Portable System Controller(275.85 k) |
| DS1678 | 功能描述:实时时钟 Real-Time Event Recorder RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1678+ | 功能描述:实时时钟 Real-Time Event Recorder RoHS:否 制造商:Microchip Technology 功能:Clock, Calendar. Alarm RTC 总线接口:I2C 日期格式:DW:DM:M:Y 时间格式:HH:MM:SS RTC 存储容量:64 B 电源电压-最大:5.5 V 电源电压-最小:1.8 V 最大工作温度:+ 85 C 最小工作温度: 安装风格:Through Hole 封装 / 箱体:PDIP-8 封装:Tube |
| DS1678J | 制造商:未知厂家 制造商全称:未知厂家 功能描述:2-Input Digital Multiplexer |
发布紧急采购，3分钟左右您将得到回复。