- 您现在的位置：买卖IC网 > PDF目录295503 > DS1722S+T&R (MAXIM INTEGRATED PRODUCTS INC) Digital Thermometer with SPI/3-Wire Interface PDF资料下载
参数资料
| 型号： | DS1722S+T&R |
| 厂商： | MAXIM INTEGRATED PRODUCTS INC |
| 元件分类： | 温度/湿度传感器 |
| 英文描述： | Digital Thermometer with SPI/3-Wire Interface |
| 中文描述： | DIGITAL TEMP SENSOR-SERIAL, 12BIT(s), 2Cel, RECTANGULAR, SURFACE MOUNT |
| 封装： | 0.150 INCH, LEAD FREE, SOIC-8 |
| 文件页数： | 12/14页 |
| 文件大小： | 384K |
| 代理商： | DS1722S+T&R |
DS1722
inactive clock is determined by sampling SCLK when CE becomes active. Therefore, either SCLK
polarity can be accommodated. Input data (SDI) is latched on the internal strobe edge and output data
(SDO) is shifted out on the shift edge (See Table 6 and Figure 3). There is one clock for each bit
transferred. Address and data bits are transferred in groups of eight, MSB first.
FUNCTION TABLE
Table 6
MODE
CE
SCLK
SDI
SDO
Disable Reset
L
Input Disabled
High Z
Write
H
CPOL=1*
Data Bit Latch
High Z
7 of 14
CPOL=0
Read
H
CPOL=1
CPOL=0
X
Next data bit
shift**
*CPOL is the “Clock Polarity” bit that is set in the control register of the microcontroller.
** SDO remains at High Z until eight bits of data are ready to be shifted out during a read.
NOTE:
CPHA bit polarity must be set to “1”.
SERIAL CLOCK AS A FUNCTION OF MICROCONTROLLER CLOCK
POLARITY (CPOL) Figure 3
CPOL=1
CPOL=0
CE
SCLK
CE
SCLK
INTERNAL
STROBE
SHIFT
INTERNAL
STROBE
SHIFT
NOTE:
CPOL is a bit that is set in the microcontroller’s Control Register.
ADDRESS AND DATA BYTES
Address and data bytes are shifted MSB first into the serial data input (SDI) and out of the serial data
output (SDO). Any transfer requires the address of the byte to specify a write or a read, followed by one
or more bytes of data. Data is transferred out of the SDO for a read operation and into the SDI for a write
operation.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1722U+ | Digital Thermometer with SPI/3-Wire Interface |
| DS1722U+T&R | Digital Thermometer with SPI/3-Wire Interface |
| DS17285S-3+T&R | 3V/5V Real-Time Clock |
| DS17285S-5+T&R | 3V/5V Real-Time Clock |
| DS1743P-85IND+ | Y2K-Compliant, Nonvolatile Timekeeping RAMs |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1722U | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1722U/T&R | 制造商:Maxim Integrated Products 功能描述:THE MAXIM DS1722U/T&R IS A TEMPERATURE SENSOR. - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Maxim DS1722U/T&R, Digital Thermometer and thermostat -55C to +125C 2.65V-5.5V 8-pin uMAX 制造商:Maxim Integrated Products 功能描述:IC THERMOMETER DIG 3-WIRE 8-USOP |
| DS1722U/T&R | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1722U+ | 功能描述:板上安装温度传感器 Digital Thermometer & Thermostat RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1722U+T&R | 制造商:Maxim Integrated Products 功能描述:TEMP SENSOR DGTL 3-WIRE/SPI 8PIN UMAX - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERMOMETER DIG 3-WIRE 8-USOP |
发布紧急采购，3分钟左右您将得到回复。