- 您现在的位置：买卖IC网 > PDF目录19386 > DS1775R1+T&R (Maxim Integrated)IC THERMOM/STAT DIG 001 SOT-23-5 PDF资料下载
参数资料
| 型号： | DS1775R1+T&R |
| 厂商： | Maxim Integrated |
| 文件页数： | 9/14页 |
| 文件大小： | 394K |
| 描述： | IC THERMOM/STAT DIG 001 SOT-23-5 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 3,000 |
| 功能： | 温度计，恒温计 |
| 传感器类型： | 内部 |
| 感应温度： | -55°C ~ 125°C |
| 精确度： | ±3°C（最小值） |
| 拓扑： | ADC，比较器，寄存器库 |
| 输出类型： | I²C?/SMBus? |
| 输出警报： | 是 |
| 输出风扇： | 无 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 工作温度： | -55°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SC-74A，SOT-753 |
| 供应商设备封装： | SOT-23-5 |
| 包装： | 带卷 (TR) |
DS1775
9 of 14
Figure 3. Data Transfer on 2-Wire Serial Bus
Figure 3 details how data transfer is accomplished on the 2-wire bus. Depending upon the state of the
R/W bit, two types of data transfer are possible:
1) Data transfer from a master transmitter to a slave receiver. The first byte transmitted by the
master is the slave address. Next follows a number of data bytes. The slave returns an acknowledge
bit after each received byte.
2) Data transfer from a slave transmitter to a master receiver. The first byte (the slave address) is
transmitted by the master. The slave then returns an acknowledge bit. Next follows a number of data
bytes transmitted by the slave to the master. The master returns an acknowledge bit after all received
bytes other than the last byte. At the end of the last received byte, a not acknowledge is returned.
The master device generates all the serial clock pulses and the START and STOP conditions. A transfer
is ended with a STOP condition or with a repeated START condition. Since a repeated START condition
is also the beginning of the next serial transfer, the bus is not released.
The DS1775 can operate in the following two modes:
1) Slave receiver mode: Serial data and clock are received through SDA and SCL. After each byte is
received, an acknowledge bit is transmitted. START and STOP conditions are recognized as the
beginning and end of a serial transfer. Address recognition is performed by hardware after reception
of the slave address and direction bit.
2) Slave transmitter mode: The first byte is received and handled as in the slave receiver mode.
However, in this mode, the direction bit indicates that the transfer direction is reversed. Serial data is
transmitted on SDA by the DS1775 while the serial clock is input on SCL. START and STOP
conditions are recognized as the beginning and end of a serial transfer.
SLAVE ADDRESS
A control byte is the first byte received following the START condition from the master device. The
control byte consists of a 4-bit control code; for the DS1775, this is set as 1001 binary for read and write
operations. The next three bits of the control byte are the device select bits (A2, A1, A0). These bits are
set to 000 (A2 = 0, A1 = 0, A0 = 0) for the DS1775R and vary according to the devices part number as
specified in the Ordering Information table. They are used by the master device to select which of eight
devices are to be accessed. The set bits are in effect the three least significant bits of the slave address.
The last bit of the control byte (R/
) defines the operation to be performed. When set to a 1 a read
operation is selected; when set to a 0 a write operation is selected. Following the START condition, the
DS1775 monitors the SDA bus checking the device type identifier being transmitted. Upon receiving the
1001 code and appropriate device select bits of 000, the DS1775 outputs an acknowledge signal on the
SDA line. See Figure 4.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-2NB-CY-F4 | CONVERTER MOD DC/DC 95V 50W |
| HMM02DRXN | CONN EDGECARD 4POS DIP .156 SLD |
| LM75BIMX-3+ | IC TEMP SENSOR WATCHDOG 8SOIC |
| VI-2N4-CY-F3 | CONVERTER MOD DC/DC 48V 50W |
| MAX31722MUA+ | IC THERMOMETER/STAT SPI-3W 8UMAX |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1775R1-U | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
| DS1775R1-U/GG8 | 制造商:Maxim Integrated Products 功能描述:TINY DIGITAL THERMOMETER AND THERMOSTAT - Tape and Reel |
| DS1775R2 | 制造商:Maxim Integrated Products 功能描述:DIGITAL THERMOMETER SOT23 T&R - Tape and Reel |
| DS1775R2/T&R | 制造商:Maxim Integrated Products 功能描述:DS1775R DIG THERM T&R 010 ADD SOT23 - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERMOM/STAT DIG 010 SOT-23-5 |
| DS1775R2/T&R | 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor |
发布紧急采购，3分钟左右您将得到回复。