参数资料
型号: DS1822Z+
厂商: Maxim Integrated
文件页数: 12/21页
文件大小: 0K
描述: IC THERMOMETER ECONO DIG 8SOIC
产品培训模块: 1-Wire Communications
Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 100
感应温度: -55°C ~ 125°C
输出类型: 数字
电源电压: 3 V ~ 5 V
精确度: ±2°C
封装/外壳: 8-SOIC(0.154",3.90mm 宽)
供应商设备封装: 8-SOIC
包装: 管件
产品目录页面: 1435 (CN2011-ZH PDF)
DS1822
issued the master must enable a strong pullup on the 1-Wire bus for at least 10ms as described in the
POWERING THE DS1822 section.
RECALL E 2 [B8h]
This command recalls the alarm trigger values (T H and T L ) and configuration data from EEPROM and
places the data in bytes 2, 3, and 4, respectively, in the scratchpad memory. The master device can issue
read time slots following the Recall E 2 command and the DS1822 will indicate the status of the recall by
transmitting 0 while the recall is in progress and 1 when the recall is done. The recall operation happens
automatically at power-up, so valid data is available in the scratchpad as soon as power is applied to the
device.
READ POWER SUPPLY [B4h]
The master device issues this command followed by a read time slot to determine if any DS1822s on the
bus are using parasite power. During the read time slot, parasite powered DS1822s will pull the bus low,
and externally powered DS1822s will let the bus remain high. Refer to the POWERING THE DS1822
section for usage information for this command.
DS1822 FUNCTION COMMAND SET Table 4
1-Wire Bus Activity
Command
Description
Protocol
After Command is Issued
Notes
Recalls T H , T L , and
B8h DS1822 transmits recall status to
Recall E
TEMPERATURE CONVERSION COMMANDS
Convert T Initiates temperature 44h DS1822 transmits conversion
conversion. status to master (not applicable
for parasite-powered DS1822s).
MEMORY COMMANDS
Read Scratchpad Reads the entire scratchpad BEh DS1822 transmits up to 9 data
including the CRC byte. bytes to master.
Write Scratchpad Writes data into scratchpad 4Eh Master transmits 3 data bytes to
bytes 2, 3, and 4 (T H , T L , DS1822.
and configuration registers).
Copy Scratchpad Copies T H , T L , and 48h None
configuration register data
from the scratchpad to
EEPROM.
2
configuration register data master.
from EEPROM to the
scratchpad.
Read Power Signals DS1822 power B4h DS1822 transmits supply status
Supply supply mode to the master. to master.
1
2
3
1
NOTES:
1. For parasite-powered DS1822s, the master must enable a strong pullup on the 1-Wire bus during
temperature conversions and copies from the scratchpad to EEPROM. No other bus activity may take
place during this time.
2. The master can interrupt the transmission of data at any time by issuing a reset.
3. All three bytes must be written before a reset is issued.
12 of 21
相关PDF资料
PDF描述
DS18S20+T&R IC THERM MICROLAN HI-PREC TO-92
7C-50.000MCB-T OSCILLATOR 50.000 MHZ 2.5V SMD
7C-27.000MCB-T OSCILLATOR 27.000 MHZ 2.5V SMD
CSX750FCC4.000M-UT OSCILLATOR 4.0000 MHZ SMD
7C-4.000MBB-T OSC 4.000 MHZ 3.3V SMD
相关代理商/技术参数
参数描述
DS1822Z/T 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Econo 1-Wire Digital Thermometer
DS1822Z/T&R 制造商:Maxim Integrated Products 功能描述:1-WIRE DIGITAL THERMOMETER SOIC T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC THERMOMETER ECONO DIG 8-SOIC
DS1822Z/T&R 功能描述:板上安装温度传感器 RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
DS1822Z+ 功能描述:板上安装温度传感器 1-Wire Digital Thermometer RoHS:否 制造商:Omron Electronics 输出类型:Digital 配置: 准确性:+/- 1.5 C, +/- 3 C 温度阈值: 数字输出 - 总线接口:2-Wire, I2C, SMBus 电源电压-最大:5.5 V 电源电压-最小:4.5 V 最大工作温度:+ 50 C 最小工作温度:0 C 关闭: 安装风格: 封装 / 箱体: 设备功能:Temperature and Humidity Sensor
DS1822Z+ 制造商:Maxim Integrated Products 功能描述:IC TEMP SENSOR 12BIT ?2 8-SOIC 制造商:Maxim Integrated Products 功能描述:IC, TEMP SENSOR, 12BIT, 2C, 8-SOIC