- 您现在的位置：买卖IC网 > PDF目录9801 > DS1852B-00C+T&R (Maxim Integrated Products)IC MONITOR TXRX OPTICAL 25-BGA PDF资料下载
参数资料
| 型号： | DS1852B-00C+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 24/26页 |
| 文件大小： | 0K |
| 描述： | IC MONITOR TXRX OPTICAL 25-BGA |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,500 |
| 类型： | 收发器 |
| 电源电压： | 2.7 V ~ 5.5 V |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 25-TFBGA，CSPBGA |
| 供应商设备封装： | 25-BGA（5x5） |
| 包装： | 带卷 (TR) |
DS1852
7 of 26
bits. This step has now adjusted the LSB of the lower 12 bits so that the best possible trim is
acquired with the lower 12 bits.
If too high a value is used in the four bits, then the resolution of the 12 bits is too high and absolute
accuracy is sacrificed. If too low a value is used in the four bits, then the resolution of the 12 bits is too
small, so a maximum reading is not possible and a large gain error is present through the entire range.
Example code can be found near the end of this data sheet.
POWER-ON LOGIC
VCC is compared to an internal reference voltage, and if it is below VCC minimum, all internal logic and
outputs are held in their reset state. When VCC rises above VCC minimum, the system reset is released.
The DS1852 will not begin monitoring operations until VCC has risen above the analog minimum
voltage. However, communication on the 2-wire bus can occur at a VCC level lower than the analog
minimum voltage. This allows access to the power-on logic bit located in Table 00h, address 6Eh, bit 0.
The analog minimum voltage is less than 2.7V but greater than the digital minimum voltage. Above the
analog minimum voltage, the DS1852 will begin to function in a predictable manner but will not satisfy
specifications until VCC is above 2.7V.
TEMPERATURE-DEPENDENT FAST ALARM COMPARATORS
The DS1852 has a three-input muxing fast alarm comparator with a response time of less than 10s for
each input. This provides a coarse but fast approximation of whether analog inputs Bin, Pin, and Rin are
above their temperature-dependent value. Each comparator has an 8-bit max value set in Table 03h,
address D8h to E7h. The trip point range is adjustable from 10mV to 2.5V. Each LSB is approximately
10mV. The outputs of these comparators are readable in Table 00h (alarm bytes 1 and 0) and may be
overwritten if their corresponding fast alarm override bit is set in Table 03h EEPROM.
The Bin alarm can be set to eight unique temperature-dependent trip values, which allows the user to set
trip points for different temperature ranges. The Pin/Rin fast alarms act similarly, but can only be set to
four unique temperature-dependent values. For more information, refer to Table 03h.
HIGH-RESOLUTION ALARM COMPARATORS
There are 10 alarm comparators for the five analog channels. There is a 'high alarm' comparator whose
output is active if the analog signal is above its threshold and a 'low alarm' comparator whose output is
active if the analog signal is below its threshold. These comparators have a 2-byte set point in the same
format as the analog converter data in Table 03h. The outputs of these comparators are readable in Table
00h (70h) and may be overwritten if their corresponding alarm override bit is set in Table 03h
EEPROM.
WARNING COMPARATORS
The 10 warning comparators function the same way as the alarm comparators, but can be set to trip at
different levels. Typically, they would be set to trip prior to the alarm comparators. The set points are in
Table 03h and the outputs can be read from Table 00h.
相关PDF资料 |
PDF描述 |
|---|---|
| VI-232-IU-F3 | CONVERTER MOD DC/DC 15V 200W |
| DS1852B-000+T&R | IC MONITOR TXRX OPTICAL 25-BGA |
| V150C12M150B | CONVERTER MOD DC/DC 12V 150W |
| VI-232-IU-F2 | CONVERTER MOD DC/DC 15V 200W |
| MAX9113ESA+T | IC LINE RCVR LVDS DUAL 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS1854 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Dual Temperature-Controlled Resistors with Two Monitors |
| DS1854B-050 | 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1854E-050 | 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS1855 | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Dual Nonvolatile Digital Potentiometer and Secure Memory |
| DS1855-010+ | 制造商:Maxim Integrated Products 功能描述:DUAL NV POT & MEM 10/10K LEAD FREE - Rail/Tube |
发布紧急采购，3分钟左右您将得到回复。