- 您现在的位置：买卖IC网 > PDF目录1914 > DS2117MX/T&R (Maxim Integrated Products)IC TERM SCSI LVD/SE ULT-3 FCHIP PDF资料下载
参数资料
| 型号： | DS2117MX/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 3/9页 |
| 文件大小： | 0K |
| 描述： | IC TERM SCSI LVD/SE ULT-3 FCHIP |
| 标准包装： | 10,000 |
| 类型： | SCSI，LVD，SE |
| 端子数： | 9 |
| 电源电压： | 4 V ~ 5.5 V |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 36-BSOP（0.295"，7.50mm 宽） |
| 供应商设备封装： | 36-SSOP |
| 包装： | 带卷 (TR) |
DS2117M
3 of 9
To ensure proper operation, the TPWR pin should be connected to the SCSI bus TERMPWR line. As
with all analog circuitry, the TERMPWR and VDD lines should be bypassed locally. A 2.2F capacitor
and a 0.01
F high frequency capacitor are recommended between TPWR and ground and placed as close
as possible to the DS2117M. The DS2117M should be placed as close as possible to the SCSI connector
to minimize signal and power trace length, thereby resulting in less input capacitance and reflections
which can degrade the bus signals.
To maintain the specified regulation, a 4.7
F capacitor is required between the VREF pin (VREF) and
ground of each DS2117M. A high frequency cap (0.1
F ceramic recommended) can also be placed on the
VREF pin in applications that use fast rise/fall time drivers. A typical SCSI bus configuration is shown in
Figure 2.
DIFFSENS NOISE FILTERING
The DS2117M incorporates a digital filter to remove high-frequency transients on the DIFFSENS control
line, thereby eliminating erroneous switching between modes. This filter eliminates the need for the
external capacitor and resistor, which heretofore performed this function. The external filter can be used
in addition to the digital filter if the DS2117M and DS2118M are to be used interchangeably.
NOTE:
DIFFSENS—Refers to the SCSI bus signal.
DIFFSENSE—Refers to the DS2117M pin name and internal circuitry capable of driving the DIFFSENS
line.
DIFF_CAP—Refers to the DS2117M pin name and internal circuitry relating to monitoring the
DIFFSENS line.
相关PDF资料 |
PDF描述 |
|---|---|
| DS2118MB+T&R | IC TERM SCSI LVD/SE ULT-3 36SSOP |
| DS2119ME+T&R | IC TERM SCSI LVD/SE ULT3 28TSSOP |
| DS2125+T&R | IC TERM SCSI ULT3 LVD/SE 48-LQFP |
| DS2127+T&R | IC TERM SCSI LVD/SE 48-LQFP |
| DS21348T | IC LIU T1/E1/J1 3.3V 44-TQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2118M | 功能描述:IC TERM SCSI LVD/SE ULT-3 36SSOP RoHS:否 类别:集成电路 (IC) >> 接口 - 信号终端器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:50 系列:- 类型:SCSI，SE 端子数:9 电源电压:4 V ~ 5.25 V 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:16-SOIC（0.154"，3.90mm 宽） 供应商设备封装:16-SOIC 包装:管件 |
| DS2118MB | 功能描述:SCSI 接口集成电路 RoHS:否 制造商:Texas Instruments 工作电源电压:2.7 V to 5.25 V 电源电流:13 mA 最大工作温度:+ 70 C 最小工作温度:0 C 安装风格:SMD/SMT 封装 / 箱体:SSOP-36 封装:Tube |
| DS2118MB/T&R | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:IC TERM SCSI LVD/SE ULT-3 36SSOP |
| DS2118MB/T&R | 功能描述:SCSI 接口集成电路 Ultra3 LVD/SE SCSI Terminator RoHS:否 制造商:Texas Instruments 工作电源电压:2.7 V to 5.25 V 电源电流:13 mA 最大工作温度:+ 70 C 最小工作温度:0 C 安装风格:SMD/SMT 封装 / 箱体:SSOP-36 封装:Tube |
| DS2118MB/T,R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Ultra3 LVD/SE SCSI Terminator |
发布紧急采购，3分钟左右您将得到回复。