- 您现在的位置：买卖IC网 > PDF目录10987 > DS2172T (Maxim Integrated Products)IC TESTER BIT ERROR RATE 32-TQFP PDF资料下载
参数资料
| 型号： | DS2172T |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 21/22页 |
| 文件大小： | 0K |
| 描述： | IC TESTER BIT ERROR RATE 32-TQFP |
| 产品培训模块： | Lead (SnPb) Finish for COTS |
| 产品变化通告： | Product Discontinuation 20/Feb/2012 |
| 标准包装： | 250 |
| 功能： | 位误码率测试器（BERT） |
| 接口： | T1 |
| 电路数： | 1 |
| 电源电压： | 4.5 V ~ 5.5 V |
| 电流 - 电源： | 10mA |
| 工作温度： | 0°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-TQFP |
| 供应商设备封装： | 32-TQFP（7x7） |
| 包装： | 托盘 |
| 包括： | 错误计数器，样式发生器和检测器 |
DS2172
8 of 22
6.0 PATTERN CONTROL REGISTER
The Pattern Control Register (PCR) is used to configure the operating parameters of the DS2172 and to
control the patterns being generated and received. Also the PCR is used to control the pattern
synchronizer and the error and bit counters.
PCR: PATTERN CONTROL REGISTER (Address=06 Hex)
(MSB)
(LSB)
TL
QRSS
PS
LC
RL
SYNCE
RESYNC
LPBK
SYMBOL
POSITION
NAME AND DESCRIPTION
TL
PCR.7
Transmit Load. A low to high transition loads the pattern generator with
the contents of the Pattern Set Registers. PCR.7 is logically OR’ed with the
input pin TL. Must be cleared and set again for subsequent loads.
QRSS
PCR.6
Zero Suppression Select. Forces a 1 into the pattern whenever the next 14
bit positions are all 0s. Should only be set when using the QRSS pattern.
0 = Zero suppression disabled
1 = Zero suppression enabled
PS
PCR.5
Pattern Select.
0 = Repetitive Pattern
1 = Pseudorandom Pattern
LC
PCR.4
Latch Count Registers. A low to high transition latches the bit and error
counts into the user accessible registers BCR and BECR and clears the
internal register count. PCR.4 is logically OR’ed with input pin LC. Must
be cleared and set again for subsequent loads.
RL
PCR.3
Receive Data Load. A transition from low to high loads the previous
32 bits of data received at RDATA into the Pattern Receive Registers
(PRR). PCR.3 is logically OR’ed with input pin RL. Must be cleared and
set again for subsequent latches.
SYNCE
PCR.2
SYNC Enable.
0 = auto resync is enabled.
1 = auto resync is disabled.
RESYNC
PCR.1
Initiate Manual Resync Process. A low to high transition will force the
DS2172 to resynchronize to the incoming pattern at RDATA. Must be
cleared and set again for a subsequent resync.
LPBK
PCR.0
Transmit/Receive Loopback Select. When enabled, the RDATA input is
disabled; TDATA continues to output data as normal. See Figure 1.
0 = loopback disabled
1 = loopback enabled
相关PDF资料 |
PDF描述 |
|---|---|
| VI-B5P-IY-F3 | CONVERTER MOD DC/DC 13.8V 50W |
| MC9S08DZ48ACLF | IC MCU 48K FLASH 3K RAM 48-LQFP |
| DS21352LN | IC TXRX T1 1-CHIP 3.3V 100-LQFP |
| S9S08DZ32F1CLH | MCU 32K FLASH AUTO 64-LQFP |
| S9S08DZ32F1MLC | MCU 32K FLASH MASK AUTO 32-LQFP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2172T/T&R | 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:IC TESTER BIT ERROR RATE 32-TQFP 制造商:Maxim Integrated Products 功能描述:Telecom ICs Bit Error Rate Tester (BERT) |
| DS2172T/T&R+ | 制造商:Maxim Integrated Products 功能描述:BERT 32P TQFP T&R LEAD FREE - Tape and Reel |
| DS2172T/T&R | 功能描述:电信集成电路 Bit Error Rate Tester (BERT) RoHS:否 制造商:STMicroelectronics 类型:Telecom IC - Various 工作电源电压:4.75 V to 5.25 V 电源电流: 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-100 封装:Tray |
| DS2172T+ | 功能描述:电信集成电路 Bit Error Rate Tester (BERT) RoHS:否 制造商:STMicroelectronics 类型:Telecom IC - Various 工作电源电压:4.75 V to 5.25 V 电源电流: 工作温度范围:- 40 C to + 85 C 安装风格:SMD/SMT 封装 / 箱体:PQFP-100 封装:Tray |
| DS2172T+T&R | 制造商:Maxim Integrated Products 功能描述:BIT ERROR RATE TESTER 32TQFP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC TESTER BIT ERROR RATE 32-TQFP 制造商:Maxim Integrated Products 功能描述:Telecom ICs Bit Error Rate Tester (BERT) |
发布紧急采购，3分钟左右您将得到回复。