参数资料
型号: DS2175SN
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: Digital Transmission Support
英文描述: DATACOM, ELASTIC BUFFER, PDSO16
封装: 0.300 INCH, SOIC-16
文件页数: 6/12页
文件大小: 243K
代理商: DS2175SN
DS2175
3 of 12
PIN Description Table 1
PIN
SYMBOL
TYPE
DESCRIPTION
1
RCLKSEL
I
Receive Clock Select. Tie to VSS for 1.544 MHz applications, to
VDD for 2.048 MHz.
2
RCLK
I
Receive Clock. 1.544 or 2.048 MHz data clock.
3
RSER
I
Receive Serial Data. Sampled on falling edge of RCLK.
4
RMSYNC
I
Receive Multifram Sync. Rising edge establishes receive side
frame and multiframe boundaries.
5
FSD
O
Frame Slip Directions. State indicates direction of last slip;
latched on slip occurrence.
6
SLIP
O
Frame Slip. Active low, open collector output. Held low for 65
SYSCLK cycles when a slip occurs.
7
ALN
I
Align. Recenters buffer on next system side frame boundary when
forced low; negative edge-triggered.
8
VSS
Signal Ground. 0.0 volts.
9
SCLKSEL
I
System Clock Select. Tie to VSS for 1.544 MHz applications, to
VDD for 2.048 MHz.
10
S/ P
I
Serial/Parallel Select. Tie to VSS for parallel backplane
applications, to VDD for serial.
11
SCHCLK
O
System Channel Clock. Transitions high on channel boundaries;
useful for serial to parallel conversion of channel data.
12
SFSYNC
I
System Frame Sync. Rising edge establishes system side frame
boundaries.
13
SMSYNC
O
System Multiframe Sync. Slip-compensated multiframe output;
used with RMSYNC to monitor depth of store real time.
14
SSER
O
System Serial Data. Updated on rising edge of SYSCLK.
15
SYSCLK
I
System Clock. 1.544 or 2.048 MHz data clock.
16
VDD
Positive Supply. 5.0 volts.
PCM BUFFER
The DS2175 utilizes a 2–frame buffer to synchronize in-coming PCM data to the system backplane clock.
Buffer depth is mode–dependent; 2.048 MHz to 2.048 MHz applications utilize 64 bytes of buffer
memory, while all other modes are supported by 48 bytes. The buffer samples data at RSER on the falling
edge of RCLK. Output data appears at SSER and is updated on the rising edge of SYSCLK. The buffer
depth is constantly monitored by onboard contention logic; a “slip” occurs when the buffer is completely
emptied or filled. Slips automatically recenter the buffer to a one–frame depth and always occur on frame
boundaries.
DATA FORMAT
Data is presented to, and output from, the elastic store in a “framed” format. A rising edge at RMSYNC
and SFSYNC establishes frame boundaries for the receive and system sides. North American (T1) frames
contain 24 data channels of 8 bits each and an F–bit (193 bits total). European (CEPT) frames contain 32
data channels (256 bits). The frame rate of both systems is 8 KHz. RMSYNC and SFSYNC do not
require a pulse at every frame boundary; if desired, they may be pulsed once to establish frame alignment.
Internal counters will then maintain the frame alignment and may be reinforced by the next rising edge at
RMSYNC and/or SFSYNC.
相关PDF资料
PDF描述
DS2176QN DATACOM, ELASTIC BUFFER, PQCC28
DS2176N DATACOM, ELASTIC BUFFER, PDIP24
DS2176 DATACOM, ELASTIC BUFFER, PDIP24
DS2176Q DATACOM, ELASTIC BUFFER, PQCC28
DS2180AQ DATACOM, FRAMER, PQCC44
相关代理商/技术参数
参数描述
DS2175SN/T&R 制造商:Maxim Integrated Products 功能描述:ELASTIC STORE-SOIC-IND-TRL - Tape and Reel 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:IC ELASTIC STORE MEMORY 16SOIC 制造商:Maxim Integrated Products 功能描述:Network Controller & Processor ICs T1/CEPT Elastic Store
DS2175SN/T&R 功能描述:网络控制器与处理器 IC T1/CEPT Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2175SN+ 功能描述:网络控制器与处理器 IC T1/CEPT Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
DS2175SN+T&R 制造商:Maxim Integrated Products 功能描述:FRAMER E1/J1/T1 5V 16SOIC W - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC ELASTIC STORE T1/CEPT 16-SOIC 制造商:Maxim Integrated Products 功能描述:Network Controller & Processor ICs T1/CEPT Elastic Store
DS2175SN+T&R 功能描述:网络控制器与处理器 IC T1/CEPT Elastic Store RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray