- 您现在的位置：买卖IC网 > PDF目录1212 > DS2436K (Maxim Integrated Products)KIT DEMO BATT ID/MON CHIP DS2436 PDF资料下载
参数资料
| 型号： | DS2436K |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 2/5页 |
| 文件大小： | 0K |
| 描述： | KIT DEMO BATT ID/MON CHIP DS2436 |
| 标准包装： | 1 |
DS2436K
The evaluation board comes populated with a hardwired DS2436, jumpers, and connectors. It also
contains a socket that can be used for programming a DS2436 in the 8-pin SO-8 package. There is also
space for a TO-92 socket (not included with this kit) which can be used for programming and evaluation
of the DS2436 in a TO-92 package. The placement of the jumpers on the board will determine which
DS2436 is being evaluated. When JMP3 is in place, the kit uses the hardwired DS2436. JMP2 enables a
DS2436 in the SO-8 socket to be evaluated or programmed, while JMP1 enables the DS2436 in the TO-
92 socket. Although multiple DS2436 devices can be connected to the same 1-Wire?
bus
simultaneously, the DS2436K Evaluation Kit only supports communication with one DS2436 device at a
time.
SETUP AND INSTALLATION
Note: The DS2436K software is a 32-bit application that runs only under Windows 95, Windows 98, or
Windows NT. Windows 3.1 and DOS are not supported.
To install the DS2436K software, exit all programs currently running and insert Installation Disk 1. Run
SETUP.EXE and the installation process is launched. Follow the prompts to complete the installation.
The DS2436K software can be uninstalled in the Add/Remove Programs tool in the Control Panel.
After the installation is complete, open the DS2436K folder and run DS2436K.EXE. A splash screen
containing information about the evaluation kit appears as the program is being loaded.
SELECTING THE COM PORT AND BAUD RATE
The first time the software runs the Select Preferences window appears. In this window, select the COM
port to which the DS9123 is attached and then hit OK. The DS2436K software saves this COM port and
baud rate selection and automatically uses the selection each time the program starts. To change the
COM port or baud rate, click the Preferences/Serial Port Settings option on the menu bar and select the
appropriate port and baud rate.
2 of 5
相关PDF资料 |
PDF描述 |
|---|---|
| DS2438K | KIT DEMO SMART BATT MON DS2438 |
| DS26303DK | KIT DESIGN FOR DS26303 |
| DS26502DK | KIT DESIGN FOR DS26502 |
| DS26503DK | KIT DESIGN FOR DS26503 |
| DS26504DK | KIT DESIGN FOR DS26504 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2436Z | 功能描述:电池管理 RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| DS2436Z/R | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Battery ID/Monitor Chip |
| DS2436Z/T | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:Battery ID/Monitor Chip |
| DS2436Z/T&R | 制造商:Maxim Integrated Products 功能描述:BATTERY ID VOLTAGE A/D 8P SOIC T&R - Tape and Reel |
| DS2436Z/T&R+W | 制造商:Maxim Integrated Products 功能描述:- Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。