参数资料
型号: DS2660-7EPD0B1
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
封装: METAL, CASE S02, MODULE
文件页数: 13/33页
文件大小: 438K
代理商: DS2660-7EPD0B1
S Series Data Sheet
100 Watt AC-DC and DC-DC Converters
APR 26, 2006 revised to SEP 25, 2006
Page 20 of 33
www.power-one.com
Table 14: Isolation
Characteristic
Input to
Output to
Unit
case + output(s)
case
output
Electric
Factory test >1 s
2.8
1
1.4
0.14
kVDC
strength
AC test voltage equivalent to factory test
2.0
1.0
0.1
kVAC
test voltage
Insulation resistance at 500 VDC
300
2
300
2
100
M
Ω
1 In accordance with EN 50116 and IEC/EN 60950 subassemblies are pretested with 5.6 kVDC.
2 Tested at 500 VDC.
Isolation
The electric strength test is performed in the factory as routine
test in accordance with EN 50116, IEC/EN 60950 and UL 1950
and should not be repeated in the field. Power-One will not
honor any guarantee claims resulting from electric strength field
tests.
LS-models Operated at Greater than 63 Hz
Above 63 Hz the earth leakage current may exceed 3.5 mA, the
maximum specified in IEC/EN 60950. The built-in Y-caps are
only approved for
≤ 100 Hz. Frequencies greater than 350 Hz
are only permitted for Vi ≤ 200 VAC.
Characteristic
Class I
Unit
LS1000, LS2000
Maximum earth
Permissible according to IEC/EN 60950
3.5
mA
leakage current
Specified value at 264 V, 50 Hz
1.43
Table 13: Leakage Currents for LS-models
Standards and Approvals
The converters are UL recognized according to UL 1950,
CAN/CSA C22.2 No. 950-95, and TV approved to IEC/EN
60950 standards.
The converters correspond to Class I equipment and have been
evaluated for:
Building in,
Basic insulation between input and case based on 250 V and
double or reinforced insulation or an earthed part between
input and output.
The use in a pollution degree 2 environment,
Connecting the input to a primary or secondary circuit which
is subject to a maximum transient rating of 2500 V.
The converters are subject to manufacturing surveillance in
accordance with the above mentioned UL and ISO 9001:2000
standards.
Railway Applications
The S Series converters have been designed according to
the Railway Standards EN50155 and EN50121. All boards
and components are coated with a protective lacquer.
Cleaning Agents
In order to avoid possible damage, any penetration of
cleaning fluids must be prevented, since the power
supplies are not hermetically sealed.
Protection Degree
Condition: Female connector fitted to the converter.
IP 30:
All models except those with option P and option
D,
or V with potentiometer.
IP 20:
All models exhibiting a potentiometer.
相关PDF资料
PDF描述
DS2660-7RD9T 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
DS2660-9EPD0T 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
DS2660-9ERD3 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
DS2660-9RD9T 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
DS2660-9RTB1 2-OUTPUT DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
DS2660-7R 功能描述:EURO-CASSETTE 100W 2X 24V RoHS:否 类别:电源 - 外部/内部(非板载) >> DC DC Converters 系列:* 标准包装:1 系列:Quint 类型:隔离 输入电压:24V 输出:24V 输出数:1 输出 - 1 @ 电流(最大):24 VDC @ 50A 输出 - 2 @ 电流(最大):- 输出 - 3 @ 电流(最大):- 输出 - 4 @ 电流(最大):- 功率(瓦特):1200W 安装类型:底座安装 工作温度:0°C ~ 40°C 效率:- 封装/外壳:模块 尺寸/尺寸:4.33" L x 9.09" W x 6.14" H(110mm x 231mm x 156mm) 包装:散装 电源(瓦特)- 最大:1200W 批准:- 其它名称:277-69722866365-NDQUINT-BAT/24DC/12AH
DS26900 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:JTAG Multiplexer/Switch
DS26900_11 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:JTAG Multiplexer/Switch
DS26900LN+ 功能描述:多路器开关 IC JTAG MUX RoHS:否 制造商:Texas Instruments 通道数量:1 开关数量:4 开启电阻(最大值):7 Ohms 开启时间(最大值): 关闭时间(最大值): 传播延迟时间:0.25 ns 工作电源电压:2.3 V to 3.6 V 工作电源电流: 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:UQFN-16
DS26900N+ 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:JTAG Multiplexer/Switch