参数资料
型号: DS2715BZ+T&R
厂商: Maxim Integrated Products
文件页数: 7/17页
文件大小: 0K
描述: IC CTRLR CHRG NIMH BATT 16-SOIC
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
标准包装: 2,500
功能: 充电管理
电池化学: 镍金属氢化物
电源电压: 4.5 V ~ 16 V
工作温度: -20°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.154",3.90mm 宽)
供应商设备封装: 16-SOIC
包装: 带卷 (TR)
DS2715: NiMH Battery Pack Charge Controller
DETAILED DESCRIPTION
Charge Cycle Overview
The DS2715 regulates the charge of up to 10 NiMH cells in a series configuration. With the mode select pin, the
DS2715 can be configured to regulate either as an error amplifier in linear mode or as a comparator in switched
mode. A charge cycle begins in one of two ways: with the application of power to the DS2715 while the cell pack is
already inserted, or with the detection of cell insertion after power-up.
After cell presence confirmation, PRECHARGE qualification occurs to prevent fast charging of deeply depleted
cells or charging under extreme temperature conditions. Pre-charging is performed at a reduced rate of
approximately ? the FAST-CHARGE current until each cell reaches 1V. The algorithm then proceeds to the FAST-
CHARGE phase. Fast charging continues as long as the cell pack temperature is less than 50 ? C based on the
THM voltage, and the cell voltage as measured at the V BATT pin in the middle of the resistor divider remains below
1.65V, indicating the cell pack is still present. Fast charging terminates normally by measuring the cell pack’s
thermal rate of change, dT/dt. When the cell pack’s thermal rate of change exceeds 0.5°C per minute, the DS2715
enters TOPOFF. The DS2715 has an internal charge timer as secondary overcharge protection if the charge is not
terminated properly by the dT/dt method. The charge termination timer duration is user selectable from 30 minutes
up to 6 hours by an external resistor on the R T pin.
Following a normally terminated or timed-out FAST-CHARGE phase, the DS2715 enters TOPOFF. It remains in
this state for one-half (one-quarter for DS2715B) of the period of the FAST-CHARGE timeout as selected by the
external resistor on R T . After the TOPOFF charge timer expires, the DONE phase continues indefinitely until the
cell pack is removed from the charger or DISCHARGE mode is entered. For the standard application circuit
configuration, when a load drawing at least Vdchg-set across the sense resistor is attached to the cell pack, the
DS2715 switches to DISCHARGE mode. All charge functions are disabled and the regulation FET is driven on to
allow the cell pack to discharge. Throughout the charging process, the open-drain LED1 output indicates the
charge status to the user.
Undervoltage Lockout (Reset)
The UVLO circuit serves as a power-up and brownout detector by monitoring V DD to prevent charging until V DD
rises above V UVLO , or when V DD drops below V UVLO - V UVLO-HYS . If UVLO is active, charging is prevented, the state
machine is forced to the RESET state, and all charge timers are reset. A 10 ? s deglitch circuit provides noise
immunity. Once V DD reaches an acceptable operating voltage, the DS2715 enters the PRESENCE state.
相关PDF资料
PDF描述
H2AXT-10102-V4-ND JUMPER-H1502TR/A2015V/X 2"
AIUR-04-152J INDUCTOR POWER 1500UH 5% T/H
V24C5T50BF CONVERTER MOD DC/DC 5V 50W
H2AXT-10102-S4-ND JUMPER-H1502TR/A2015S/X 2"
DS2715Z+T&R IC NIMH CHARGER 16-SOIC
相关代理商/技术参数
参数描述
DS2715KLINEAR 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
DS2715KLINEAR+ 制造商:Maxim Integrated Products 功能描述:DS2715 LINEAR EVAL KIT - Boxed Product (Development Kits)
DS2715KSWITCH 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V
DS2715KSWITCH+ 制造商:Maxim Integrated Products 功能描述:EVALUATION KIT FOR THE DS2715 - Boxed Product (Development Kits)
DS2715Z 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:NiMH Battery Pack Charge Controller