- 您现在的位置：买卖IC网 > PDF目录16211 > DS2775G+ (Maxim Integrated Products)IC FUEL GAUGE LI+ 2CELL 14-TDFN PDF资料下载
参数资料
| 型号： | DS2775G+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 34/46页 |
| 文件大小： | 0K |
| 描述： | IC FUEL GAUGE LI+ 2CELL 14-TDFN |
| 产品培训模块： | 1-Wire Communications Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 60 |
| 功能： | 燃料，电量检测计/监控器 |
| 电池化学： | 锂离子（Li-Ion）、锂聚合物（Li-Pol） |
| 电源电压： | 4 V ~ 9.2 V |
| 工作温度： | -20°C ~ 70°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 14-WFDFN 裸露焊盘 |
| 供应商设备封装： | 14-TDFN-EP（3x5） |
| 包装： | 管件 |
| 产品目录页面： | 1436 (CN2011-ZH PDF) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页当前第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页
2-Cell, Stand-Alone, Li+ Fuel-Gauge IC with
Protector and Optional SHA-1 Authentication
Challenge command. The host then issues the Compute
MAC or Compute MAC with ROM ID command. The
MAC is computed per FIPS 180, and then returned as a
160-bit serial stream, beginning with the LSb.
DS2776/DS2778 Authentication
Commands
Write Challenge [0Ch]
This command writes the 64-bit challenge to the
DS2776/DS2778. The LSB of the 64-bit data argument
can begin immediately after the MSB of the command
has been completed. If more than 8 bytes are written,
the final value in the Challenge register is indetermi-
nate. The Write Challenge command must be issued
prior to every Compute MAC or Compute Next Secret
command for reliable results.
Compute MAC Without ROM ID [36h]
This command initiates an SHA-1 computation without
including the ROM ID in the message block. Because
the ROM ID is not used, this command allows the use
of a master secret and MAC response independent of
the ROM ID. The DS2776/DS2778 computes the MAC
in t SHA after receiving the last bit of this command.
After the MAC computation is complete, the host must
write eight write-zero time slots and then issue 160 read
time slots to receive the 20-byte MAC. See Figure 25 for
command timing.
Compute MAC with ROM ID [35h]
This command is structured the same as the Compute
MAC without ROM ID, except that the ROM ID is includ-
ed in the message block. With the ROM ID unique to
each DS2776/DS2778 included in the MAC computation,
use of a unique secret in each token and a master secret
in the host device is allowed. Refer to Application Note
1099: White Paper 4: Glossary of 1-Wire SHA-1 Terms for
more information. See Figure 25 for command timing.
Table 10. Authentication Function Commands
Table 10 summarizes SHA-1-related commands used
while authenticating a battery or peripheral device. The
Secret Management Function Commands section
describes four additional commands for clearing, com-
puting, and locking of the secret.
Secret Management Function
Commands
Table 11 summarizes all the secret management func-
tion commands.
Clear Secret [5Ah]
This command sets the 64-bit secret to all 0s (0000
0000 0000 0000h). The host must wait for t EEC for the
DS2776/DS2778 to write the new secret value to
EEPROM. See Figure 28 for command timing.
Compute Next Secret Without
ROM ID [30h]
This command initiates an SHA-1 computation of the
MAC and uses a portion of the resulting MAC as the
next or new secret. The MAC computation is performed
with the current 64-bit secret and the 64-bit challenge.
Logical 1s are loaded in place of the ROM ID. The out-
put MAC’s 64 bits are used as the new secret value.
The host must allow t SHA after issuing this command for
the SHA calculation to complete, then wait t EEC for the
DS2776/DS2778 to write the new secret value to
EEPROM. See Figure 26 for command timing.
Compute Next Secret with ROM ID [33h]
This command initiates an SHA-1 computation of the
MAC and uses a portion of the resulting MAC as the
next or new secret. The MAC computation is performed
with the current 64-bit secret, the 64-bit ROM ID, and
the 64-bit challenge. The output MAC’s 64 bits are used
as the new secret value. The host must allow t SHA after
issuing this command for the SHA calculation to com-
plete, then wait t EEC for the DS2776/DS2778 to write
COMMAND
Write Challenge
Compute MAC without ROM ID (and
Return MAC for the DS2776 only)
Compute MAC with ROM ID (and Return
MAC for the DS2776 only)
Read ROM ID (DS2778 only)
Read MAC (DS2778 only)
HEX
0Ch
36h
35h
39h
3Ah
FUNCTION
Writes 64-bit challenge for SHA-1 processing. Required prior to issuing
Compute MAC and Compute Next Secret commands.
Computes hash of the message block with logical 1s in place of the ROM
ID. (Returns the 160-bit MAC for the DS2776 only.)
Computes hash of the message block including the ROM ID. (Returns the
160-bit MAC for the DS2776 only.)
Returns the ROM ID (DS2778 only).
Returns the 160-bit MAC (DS2778 only).
34
______________________________________________________________________________________
相关PDF资料 |
PDF描述 |
|---|---|
| M3AAK-2060K | IDC CABLE - MSC20K/MC20F/MSC20K |
| M3CCK-2060K | IDC CABLE - MKC20K/MC20F/MKC20K |
| ASM06DRKS | CONN EDGECARD 12POS DIP .156 SLD |
| M3CWK-3006J | IDC CABLE - MKC30K/MC34G/MPL30K |
| M3AWK-3006J | IDC CABLE - MSC30K/MC34G/MPL30K |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2775G+ | 功能描述:电池管理 2-Cell Stand-Alone Li+ Fuel-Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| DS2775G+T&R | 制造商:Maxim Integrated Products 功能描述: 制造商:Maxim Integrated Products 功能描述:2S FG PROT 1W 14L 3X5 TDFN T&R - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC FUEL GAUGE LI+ 2CELL 14-TDFN 制造商:Maxim Integrated Products 功能描述:Battery Management 2-Cell Stand-Alone Li+ Fuel-Gauge |
| DS2775G+T&R | 功能描述:电池管理 2-Cell Stand-Alone Li+ Fuel-Gauge RoHS:否 制造商:Texas Instruments 电池类型:Li-Ion 输出电压:5 V 输出电流:4.5 A 工作电源电压:3.9 V to 17 V 最大工作温度:+ 85 C 最小工作温度:- 40 C 封装 / 箱体:VQFN-24 封装:Reel |
| DS2775G+TR | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:2-Cell, Stand-Alone, Li+ Fuel-Gauge IC with Protector and Optional SHA-1 Authentication |
| DS2775GR | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:2-Cell, Stand-Alone, Li+ Fuel-Gauge IC with Protector and Optional SHA-1 Authentication |
发布紧急采购，3分钟左右您将得到回复。