- 您现在的位置：买卖IC网 > PDF目录9047 > DS2890P-000+ (Maxim Integrated Products)IC POT DIGITAL 1-WIRE 100K 6TSOC PDF资料下载
参数资料
| 型号： | DS2890P-000+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 21/27页 |
| 文件大小： | 0K |
| 描述： | IC POT DIGITAL 1-WIRE 100K 6TSOC |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 120 |
| 接片： | 256 |
| 电阻（欧姆）： | 100k |
| 电路数： | 1 |
| 温度系数： | 标准值 800 ppm/°C |
| 存储器类型： | 易失 |
| 接口： | 1 线 串行 |
| 电源电压： | 2.8 V ~ 6 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 6-LSOJ |
| 供应商设备封装： | 6-TSOC |
| 包装： | 管件 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页当前第21页第22页第23页第24页第25页第26页第27页
DS2890
3 of 27
OPERATION
The DS2890 is a single element digital potentiometer; a block diagram of the device is shown in Figure 1.
The device has a total of 256 linearly spaced tap points including the RL and RH terminals; a total of 255
resistive segments exist between the RL and RH terminals. These tap points are accessible to the WIPER
terminal whose position is controlled via the 1-Wire bus interface. Wiper position and device state are
maintained as long as the 1-Wire bus is active or the VDD supply is applied within operating limits.
Otherwise, a power-on reset will occur and the wiper position and operating state will return to power-on
default conditions.
FIGURE 1. DS2890 BLOCK DIAGRAM
As shown in the figure the device has five major elements: the 1-Wire Function Controller, the
Potentiometer Controller, the 64-bit ROM, the resistor array, and Parasite Power circuitry. Each of these
elements is discussed in detail throughout the remainder of the data sheet. DS2890 control including
device selection, positioning/reading the potentiometer wiper, and device operating state is performed
over the 1-Wire bus. The hierarchical structure of the 1-Wire protocol as applicable to the DS2890 is
shown in Figure 2. As shown, the control sequence starts with the 1-Wire bus master issuing one of eight
ROM function commands. After a ROM function command is successfully completed potentiometer
functions may be executed. The protocol for ROM and potentiometer functions are described in the
“COMMAND FLOW” section.
For the 3-pin TO-92 package configuration and operation see the
“TO-92 PACKAGE OPERATION” section.
相关PDF资料 |
PDF描述 |
|---|---|
| DS1869S-100+T&R | IC RHEOSTAT DALLST 3V 100K 8SOIC |
| VI-B5Z-MX-F2 | CONVERTER MOD DC/DC 2V 30W |
| VI-B5Z-MX-F1 | CONVERTER MOD DC/DC 2V 30W |
| VI-B5Y-MX-F4 | CONVERTER MOD DC/DC 3.3V 49.5W |
| VI-B5Y-MW-F4 | CONVERTER MOD DC/DC 3.3V 66W |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2890P-000+ | 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| DS2890P-000+T&R | 制造商:Maxim Integrated Products 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC |
| DS2890P-000+T&R | 功能描述:IC POT DIGITAL 1-WIRE 100K 6TSOC RoHS:是 类别:集成电路 (IC) >> 数据采集 - 数字电位器 系列:- 产品培训模块:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 标准包装:2,500 系列:- 接片:32 电阻（欧姆）:50k 电路数:1 温度系数:标准值 50 ppm/°C 存储器类型:易失 接口:3 线串行（芯片选择，递增，增/减） 电源电压:2.7 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:SOT-23-6 细型，TSOT-23-6 供应商设备封装:TSOT-23-6 包装:带卷 (TR) |
| DS2890T | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:1-Wire Digital Potentiometer |
| DS2890T-000 | 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。