参数资料
| 型号： | DS3154DK |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/11页 |
| 文件大小： | 0K |
| 描述： | KIT DEMO FOR DS3154 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 1 |
| 主要目的： | 电信，线路接口单元（LIU） |
| 已用 IC / 零件： | DS3154 |
| 已供物品： | 板，CD |
7) Set the TDSA and TDSB bits in each GCR register to transmit a 2 - 1 PRBS pattern.
DS3154 Demo Kit
STS-1 Configuration
1) On the system connector, jumper all four TPOS pins and all four TNEG pins to ground.
2) On jumpers JMP7 through JMP10, connect the center post to the EXT post. This connects the DS3154’s
TCLK1 through TCLK4 pins to the respective pins on the system connector. (The position of jumpers JMP1
through JMP6 does not matter.)
3) Apply an STS-1 clock source (51.84MHz) to the STMCLK, TCLK1, TCLK2, TCLK3, and TCLK4 pins on the
system connector.
4) Press and release the DS3154 reset button on the DK board –OR– set and then clear the RST bit in each GCR
register.
5) Set the E3 and STS bits in each GCR register to configure each LIU for STS-1 operation.
6) Clear the TTS bit in each TCR register and clear the RTS bit in each RCR register.
15
8) For each LIU port, connect the transmitter to the receiver using 75 W coax to configure an external local
loopback –OR– set the LLB bit in each GCR register to configure an internal local loopback.
9) Press the Read All button twice to update the display.
At this point the transmitter is generating a 2
15
- 1 PRBS pattern that is being looped back to the receiver. On the
DS3154DK board, the PRBS LEDs should be lit, indicating PRBS sync. The TDM and RLOS LEDs should not be
lit. In the register map, the SR and SRL registers should contain all zeros.
DS3154 INFORMATION
The DS3154 Quick View page on our website has the latest DS3154 data sheet, application notes, and downloads.
Go to www.maxim-ic.com/DS3154 .
DS3154DK INFORMATION
The DS3154DK Quick View page on our website has the latest DS3154DK data sheet, ChipView software updates,
and downloads. Go to www.maxim-ic.com/DS3154DK .
TECHNICAL SUPPORT
For additional technical support, please email your questions to telecom.support@dalsemi.com .
Maxim/Dallas Semiconductor cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim/Dallas Semiconductor product.
No circuit patent licenses are implied. Maxim/Dallas Semiconductor reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
? 2003 Maxim Integrated Products · Printed USA
7 of 11
相关PDF资料 |
PDF描述 |
|---|---|
| DS3170DK | KIT DESIGN FOR DS3170 |
| DS33R11DK | KIT DESIGN FOR DS33R11 |
| DS33Z41DK | KIT DESIGN FOR DS33Z41 |
| DS9097E# | COM PORT ADAPTER |
| DS9097U-E25# | ADAPTER COM PORT RS232 DB-25 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3154N | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3154N# | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3154N+ | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3154NA2 | 功能描述:网络控制器与处理器 IC Quad DS3/E3/STS-1 Line Interface Unit RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流（最大值）:595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray |
| DS3154NB1 | 制造商:Maxim Integrated Products 功能描述:DS3154B QUAD DS3/E3 LIU IND - Rail/Tube 制造商:Maxim Integrated Products 功能描述:DS3/E3/STS-1 LIUS |
发布紧急采购，3分钟左右您将得到回复。