- 您现在的位置：买卖IC网 > PDF目录1916 > DS3503U+ (Maxim Integrated Products)IC POT DGTL NV 128TAP 10-MSOP PDF资料下载
参数资料
| 型号： | DS3503U+ |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 12/13页 |
| 文件大小： | 0K |
| 描述： | IC POT DGTL NV 128TAP 10-MSOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 501 |
| 接片： | 128 |
| 电阻（欧姆）： | 5k |
| 电路数： | 2 |
| 温度系数： | 标准值 4 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | I²C（设备位址） |
| 电源电压： | 2.7 V ~ 3.6 V |
| 工作温度： | -40°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 10-TFSOP，10-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 10-µMAX |
| 包装： | 管件 |
DS3503
NV, I2C, Stepper Potentiometer
8
_______________________________________________________________________________________
PERIOD/2 pulses have been applied to the SYNC
input. During this disable time, the power-up or new
WR value is applied to the RW potentiometer and
position 40h (code 64 decimal) is applied to the Y
potentiometer. Additionally, the step counter is
cleared during this disable time.
After the initialization pulses, stepping is enabled again.
The RW potentiometer starts from the power-up or new
WR value and the Y potentiometer starts from position
40h (code 64 decimal). The step counter starts from
zero in the up direction.
The stepping function is further described as follows:
An internal counter called PERIODCOUNT is set equal
to PERIOD.
The input to the RW potentiometer is WR + COUNT; the
input to the Y potentiometer is code 64 + COUNT.
When a SYNC pulse is received:
PERIODCOUNT = PERIODCOUNT - 1
If PERIODCOUNT = 0 (underflow), the following actions
occur:
If direction is UP:
COUNT = min (COUNT + 1, STEPCOUNT)
RW = min (127 - STEPCOUNT, WR + COUNT);
Y = 64 + COUNT
PERIODCOUNT is reset to PERIOD
If direction is DOWN:
COUNT = max (COUNT - 1, -STEPCOUNT)
RW = max (STEPCOUNT, WR - COUNT);
Y = 64 - COUNT
PERIODCOUNT is reset to PERIOD
If COUNT = STEPCOUNT, direction is changed from
UP to DOWN.
If COUNT = -STEPCOUNT, direction is changed from
DOWN to UP.
In this way the RW output steps up to WR+STEP-
COUNT, then steps down to WR-STEPCOUNT, and then
repeats the cycle. The outputs of the RW and Y DACs
change by one LSB = (VRH - VRL)/127 per PERIOD.
STEPCOUNT and PERIOD are programmable from I2C
and are stored in the nonvolatile SCR (Table 2).
The STEPCOUNT 5-bit value programmed into
SCR<4:0> controls the stepping range reflected in the
RW or Y outputs per Table 4, assuming STEPCOUNT <
IVR < 127 - STEPCOUNT:
Example 1:
WR = 41h (65 decimal): SCR<4:0> = STEPCOUNT
= 10000 (16 decimal)
RW range: 49
81 (decimal)
Y range: 48
80 (decimal)
Example 2:
WR = 50h (80 decimal): SCR<4:0> = STEPCOUNT
= 11000 (24 decimal)
RW range: 56
104 (decimal)
Y range: 40
88 (decimal)
Example 3: Clamping at Lower Rail
WR = 10h (16 decimal): SCR<4:0> = STEPCOUNT
= 11111 (31 decimal)
RW range: 0
62 (decimal)
Y range: 33
95 (decimal)
Example 4: Clamping at Upper Rail
WR = 70h (112 decimal): SCR<4:0> = STEPCOUNT
= 11111 (31 decimal)
RW range: 65
127 (decimal)
Y range: 33
95 (decimal)
SCR<4:0>
(BINARY)
DAC RANGE
0 0000
Stepping disabled; WR is
output
0 0001
Invalid setting. Do not
program.
0 0010
WR-2 to WR+2
0 0011
WR-3 to WR+3
0 0100
WR-4 to WR+4
0 0101
WR-5 to WR+5
. . .
1 1110
WR-30 to WR+30
. . .
1 1111
WR-31 to WR+31
Table 4. DAC Stepping Range
相关PDF资料 |
PDF描述 |
|---|---|
| DS3897MX | IC TXRX BTL TRAPEZIODAL 20-SOIC |
| DS3901E+ | IC RESIST VAR TRPL 14TSSOP |
| DS3902U-530+T&R | IC DIGITAL RESISTER EEPROM 8USOP |
| DS3903E-020/T&R | IC POT NV TRIPLE 128POS 20-TSSOP |
| DS3905U-020 | IC POT NV TRIPLE 128POS 10-USOP |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS3503U+ | 功能描述:数字电位计 IC NV I2C Stepper RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS3503U+T&R | 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 128POS 5KOHM DUAL 10USOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:IC POT DGTL NV 128TAP 10-MSOP 制造商:Maxim Integrated Products 功能描述:Digital Potentiometer ICs NV I2C Stepper |
| DS3503U+T&R | 功能描述:数字电位计 IC NV I2C Stepper RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS3503U+TR | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:NV, I2C, Stepper Potentiometer |
| DS3504FP000 | 制造商:Thomas & Betts 功能描述:30A,PLG,3P4W,MG,404,000,3P480V,FC |
发布紧急采购，3分钟左右您将得到回复。