- 您现在的位置：买卖IC网 > PDF目录9049 > DS4301U-200 (Maxim Integrated Products)IC POT DIG NV 200K 32POS 8-USOP PDF资料下载
参数资料
| 型号： | DS4301U-200 |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 3/7页 |
| 文件大小： | 0K |
| 描述： | IC POT DIG NV 200K 32POS 8-USOP |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 50 |
| 接片： | 32 |
| 电阻（欧姆）： | 200k |
| 电路数： | 1 |
| 温度系数： | 标准值 ±250 ppm/°C |
| 存储器类型： | 非易失 |
| 接口： | 3 线（芯片选择，递增，增/减） |
| 电源电压： | 2.4 V ~ 5.5 V |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-TSSOP，8-MSOP（0.118"，3.00mm 宽） |
| 供应商设备封装： | 8-uMAX |
| 包装： | 管件 |
DS4301
Nonvolatile, 32-Position Digital Potentiometer
_____________________________________________________________________
3
Note 1:
All voltages are referenced to ground.
Note 2:
STBY specified for VCC equal to 3.0V and 5.0V while control port logic pins are driven to VCC or GND.
Note 3:
Absolute linearity is used to determine wiper voltage versus expected voltage as determined by wiper position.
Note 4:
Relative linearity is used to determine the change of wiper voltage between two adjacent wiper positions.
Note 5:
The INC low to CS inactive time is the transition time that allows the three control pins to become inactive without writing
the wiper position to the EEPROM.
Note 6:
Wiper storage time is the time required for the wiper position to be written to the EEPROM. During this time, the three-ter-
minal interface is inactive.
Note 7:
Wiper load time is specified as the time required to load the wiper position stored in EEPROM once VCC has reached a
stable operating voltage greater than or equal to VCC MIN.
Note 8:
Power-up time is specified as the time required before the three control pins become active once a stable power supply
level of at least VCC MIN has been reached.
Note 9:
The maximum number of EEPROM write cycles is guaranteed by design and is not tested in production.
AC ELECTRICAL CHARACTERISTICCS
(VCC = VCC MIN to VCC MAX; TA = -40°C to +85°C. See Figure 2 for timing diagram.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
CS to INC Setup
tCI
50
ns
U/D to INC Setup
tDI
100
ns
INC Low Period
tIL
50
ns
INC High Period
tIH
100
ns
INC Inactive to CS Inactive
tIC
500
ns
CS Deselect Time
tCPH
100
ns
Wiper Change to INC Low
tIW
200
ns
INC Rise and Fall Times
tR, tF
5s
INC Low to CS Inactive
tIK
(Note 5)
50
ns
Wiper Storage Time
tWST
(Note 6)
10
ms
CS Low Pulse
tCLP
100
ns
Wiper Load Time
tWLT
(Note 7)
500
s
Power-Up Time
tPU
(Note 8)
2
ms
NONVOLATILE MEMORY CHARACTERISTICS
(VCC = VCC MIN to VCC MAX)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
UNITS
EEPROM Write Cycles
+70°C (Note 9)
50,000
相关PDF资料 |
PDF描述 |
|---|---|
| MS27474E24B35PA | CONN RCPT 128POS JAM NUT W/PINS |
| VI-JWX-MZ-F3 | CONVERTER MOD DC/DC 5.2V 25W |
| VI-JWX-MZ-F2 | CONVERTER MOD DC/DC 5.2V 25W |
| M83723/78W2457N | CONN PLUG 57POS STRAIGHT W/PINS |
| DS1869S-50+ | IC RHEOSTAT DALLAST 3V 50K 8SOIC |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS4301U-200/T&R | 制造商:Maxim Integrated Products 功能描述:IC POT DIG NV 200K 32POS 8-USOP |
| DS4301U-200/T&R | 功能描述:数字电位计 IC RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS4301U-200+ | 功能描述:数字电位计 IC Nonvolatile 32-Position RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
| DS4301U-200+T&R | 制造商:Maxim Integrated Products 功能描述:DGTL POTENTIOMETER 32POS 200KOHM SGL 8USOP - Tape and Reel 制造商:Maxim Integrated Products 功能描述:Digital Potentiometer ICs Nonvolatile 32-Position |
| DS4301U-200+T&R | 功能描述:数字电位计 IC Nonvolatile 32-Position RoHS:否 制造商:Maxim Integrated 电阻:200 Ohms 温度系数:35 PPM / C 容差:25 % POT 数量:Dual 每 POT 分接头:256 弧刷存储器:Volatile 缓冲刷: 数字接口:Serial (3-Wire, SPI) 描述/功能:Dual Volatile Low Voltage Linear Taper Digital Potentiometer 工作电源电压:1.7 V to 5.5 V 电源电流:27 uA 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:TQFN-16 封装:Reel |
发布紧急采购，3分钟左右您将得到回复。