- 您现在的位置：买卖IC网 > PDF目录1995 > DS4302Z-020/T&R (Maxim Integrated Products)IC DAC 5-BIT SGL 0-2.0V 8-SOIC PDF资料下载
参数资料
| 型号： | DS4302Z-020/T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 8/8页 |
| 文件大小： | 0K |
| 描述： | IC DAC 5-BIT SGL 0-2.0V 8-SOIC |
| 标准包装： | 2,500 |
| 设置时间： | 10µs |
| 位数： | 5 |
| 数据接口： | 串行 |
| 转换器数目： | 1 |
| 电压电源： | 单电源 |
| 工作温度： | -40°C ~ 85°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 8-SOIC（0.154"，3.90mm 宽） |
| 供应商设备封装： | 8-SOIC |
| 包装： | 带卷 (TR) |
| 输出数目和类型： | 1 电压，单极 |
| 采样率（每秒）： | * |
DS4302
2-Wire, 5-Bit DAC with Three Digital Outputs
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
8 _____________________Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600
2004 Maxim Integrated Products
Printed USA
is a registered trademark of Maxim Integrated Products.
DALLAS is a registered trademark of Dallas Semiconductor Corporation.
2-Wire Communication
Writing to a Slave: The master must generate a START
condition, write the slave address (R/W = 0), write the
memory address, write the byte of data, and generate a
STOP condition. Remember the master must read the
slave’s acknowledgement during all byte-write opera-
tions. See Figure 2 for the write command example.
Reading from a Slave: To read from the slave, the
master generates a START condition, writes the slave
address with R/W = 1, receives an ACK from the slave,
reads a memory address of 00h from the slave, sends
an ACK to the slave, reads the data byte, then sends
an ACK to indicate the end of the transfer, and gener-
ates a STOP condition. See Figure 2 for the read com-
mand example.
Application Information
Power-Supply Decoupling
To achieve the best results when using the DS4302,
decouple the power supply with a 0.01F or a 0.1F
capacitor. Use high-quality, ceramic, surface-mount
capacitors, and mount the capacitors as close as pos-
sible to the VCC and GND pins of the DS4302 to mini-
mize lead inductance.
SDA and SCL Pullup Resistors
Pullup resistor values for SDA and SCL should be cho-
sen to ensure that the rise and fall times listed in the AC
electrical characteristics are within specification.
Package Information
For the latest package outline information, go to
www.maxim-ic.com/DallasPackInfo.
Chip Information
TRANSISTOR COUNT: 2428
SUBSTRATE CONNECTED TO GROUND
相关PDF资料 |
PDF描述 |
|---|---|
| DS4302Z-020+ | IC DAC 5-BIT SGL 0-2.0V 8-SOIC |
| DS4311P+ | IC OSC CLOCK 311.04MHZ 10-LCCC |
| DS4404N+ | IC DAC 4CH I2C ADJ 14-TDFN |
| DS4412U+ | IC DAC DUAL CH I2C ADJ 8-USOP |
| DS4424N+ | IC DAC 7BIT 4CH 5.5V 14-TDFN |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS4303 | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Voltage Sample and Infinite Hold |
| DS4303K | 功能描述:电源管理IC开发工具 RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V |
| DS4303R/R | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Voltage Sample and Infinite Hold |
| DS4303R/T | 制造商:MAXIM 制造商全称:Maxim Integrated Products 功能描述:Voltage Sample and Infinite Hold |
| DS4303R/T&R | 制造商:Maxim Integrated Products 功能描述:NV ADJ VOLTAGE REFERENCE SOT23-5 - Tape and Reel |
发布紧急采购，3分钟左右您将得到回复。