参数资料
型号: DS87C530-KCL
厂商: Maxim Integrated Products
文件页数: 22/45页
文件大小: 0K
描述: IC MCU EPR/ROM W/RTC 33MZ 52CLCC
标准包装: 23
系列: 87C
核心处理器: 8051
芯体尺寸: 8-位
速度: 33MHz
连通性: EBI/EMI,SIO,UART/USART
外围设备: 电源故障复位,WDT
输入/输出数: 32
程序存储器容量: 16KB(16K x 8)
程序存储器类型: EPROM,UV
RAM 容量: 1K x 8
电压 - 电源 (Vcc/Vdd): 4.5 V ~ 5.5 V
振荡器型: 外部
工作温度: 0°C ~ 70°C
封装/外壳: 52-CLCC,开窗(J 形引线)
包装: 管件
DS87C530/DS83C530 EPROM/ROM Microcontrollers with Real-Time Clock
29 of 45
DS87C530 SECURITY OPTIONS
The DS87C530 employs a standard three-level lock that restricts viewing of the EPROM contents. A 64-
byte Encryption Array allows the authorized user to verify memory by presenting the data in encrypted
form.
Lock Bits
The security lock consists of 3 lock bits. These bits select a total of 4 levels of security. Higher levels
provide increasing security but also limit application flexibility. Table 10 shows the security settings.
Note that the programmer cannot directly read the state of the security lock. User software has access to
this information as described in the Memory section.
Encryption Array
The Encryption Array allows an authorized user to verify EPROM without allowing the true memory to
be dumped. During a verify, each byte is Exclusive NORed (XNOR) with a byte in the Encryption Array.
This results in a true representation of the EPROM while the Encryption is unprogrammed (FFh). Once
the Encryption Array is programmed in a non-FFh state, the verify value will be encrypted.
For encryption to be effective, the Encryption Array must be unknown to the party that is trying to verify
memory. The entire EPROM also should be a non-FFh state or the Encryption Array can be discovered.
The Encryption Array is programmed as shown in Table 9. Note that the programmer cannot read the
array. Also note that the verify operation always uses the Encryption Array. The array has no impact
while FFh. Simply programming the array to a non-FFh state will cause the encryption to function.
Other EPROM Options
The DS87C530 has user-selectable options that must be set before beginning software execution. These
options use EPROM bits rather than SFRs.
Program the EPROM selectable options as shown in Table 9. The Option Register sets or reads these
selections. The bits in the Option Control Register have the following function:
Bits 7 to 4
Reserved, program to 1.
Bit 3
Watchdog POR default. Set = 1; Watchdog reset function is disabled on power-up.
Set = 0; Watchdog reset function is enabled automatically.
Bits 2 to 0
Reserved. Program to 1.
DS87C530 Signature
The Signature bytes identify the product and programming revision to EPROM programmers. This
information is at programming addresses 30h, 31h, and 60h. This information is as follows:
ADDRESS
VALUE
MEANING
30h
DAh
Manufacturer
31h
30h
Model
60h
01h
Extension
相关PDF资料
PDF描述
DS87C550-QCL+ IC MCU EPROM ADC/PWM HS 68-PLCC
DS89C450-ENL IC MCU FLASH 64KB 33MHZ 44-TQFP
DS9034PCI IC SRAM NV TIMEKEEPING POWERCAP
DS9034PCX PCM W/CRYSTAL NV SRAM SNAP-ON
DS9092L+ IBUTTON PROBE PANEL MOUNT W/LED
相关代理商/技术参数
参数描述
DS87C530-QCL 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
DS87C530-QCL+ 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT
DS87C530-QEL 制造商:Rochester Electronics LLC 功能描述: 制造商:Maxim Integrated Products 功能描述:
DS87C530-QNL 功能描述:8位微控制器 -MCU EPROM MCU w/RTC RoHS:否 制造商:Silicon Labs 核心:8051 处理器系列:C8051F39x 数据总线宽度:8 bit 最大时钟频率:50 MHz 程序存储器大小:16 KB 数据 RAM 大小:1 KB 片上 ADC:Yes 工作电源电压:1.8 V to 3.6 V 工作温度范围:- 40 C to + 105 C 封装 / 箱体:QFN-20 安装风格:SMD/SMT