参数资料
型号: DSPIC33FJ16GS504-H/PT
厂商: Microchip Technology
文件页数: 22/36页
文件大小: 0K
描述: IC DSC 16BIT 16KB FLASH 44-TQFP
标准包装: 160
系列: dsPIC™ 33F
核心处理器: dsPIC
芯体尺寸: 16-位
速度: 40 MIP
连通性: I²C,IrDA,LIN,SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 35
程序存储器容量: 16KB(16K x 8)
程序存储器类型: 闪存
RAM 容量: 2K x 8
电压 - 电源 (Vcc/Vdd): 3 V ~ 3.6 V
数据转换器: A/D 12x10b,D/A 1x10b
振荡器型: 内部
工作温度: -40°C ~ 150°C
封装/外壳: 44-TQFP
包装: 管件
www.microchip.com/16bit
29
Methods and Modules Ready to Use
Methods
Emulating Data EEPROM for PIC18 and
PIC24 MCUs, dsPIC DSCs and PIC32
For devices that do not have on-chip EEPROM, emulating
EEPROM with on-chip Flash memory my be an important
option. This application note presents an interface similar to
an internal data EEPROM, but uses available on-chip Flash
memory to improve endurance by a factor as high as 500.
(Application Note: AN1095)
Achieving Higher ADC Resolution Using Oversampling
This application note describes oversampling as a method to
add additional bits of accuracy to the 12-bit ADC conversion
in a dsPIC DSC. (Application Note: AN1152)
Bootloader for PIC24 MCUs and dsPIC DSCs
This application note describes a UART-based bootloader for
all 16-bit MCU and DSC families. (Application Note: AN1094)
A Serial Bootloader for PIC24F Devices
This application note describes a UART-based bootloader
and includes Microchip’s PIC24F Quick Programmer (P24QP)
Windows-based graphical programming interface. (Application
Note: AN1157)
Implementing Digital Lock-In Amplifiers
Using the dsPICDSC
Conventionally, lock-in amplifiers use complicated (and
expensive) analog circuitry to perform the phase sensitive
detection and filtering. However, modern Digital Signal
Controllers (DSCs), such as the dsPIC30F and dsPIC33F
families, can be used to remove large amounts of the analog
circuitry by performing the necessary operations in software.
This capability provides a number of additional benefits
including increased reliability, resistance to temperature and
aging effects, and the ease with which the system can be
modified in the field. (Application Note: AN1115)
Low Power Design Guide
This document seeks to simplify the transition to
low-power applications by providing a single location for the
foundations of low-power design for embedded systems.
The examples discussed in this document will focus on
power consumption from the viewpoint of the microcontroller
(MCU). (Application Note: AN1416)
Modules
Cyclic Redundancy Code (CRC) Module
CRC is one of the most versatile error checking algorithm
used in various digital communication systems. This
application note illustrates how to use the hardware CRC
module on selected 16-bit MCUs and DSCs. Users can
program any user-defined generator polynomial into this
module for CRC computation. (Application Note: AN1148)
MATLAB Device Blocks for MPLAB IDE
The Microchip Device Blocksets for MATLAB Simulink provide
a set of interface-compliant configuration and run-time
peripheral blocks for the dsPIC30 and dsPIC33 DSCs.
Complete applications can be created in the form of a
MATLAB/SIMULINK model using blocksets provided by
Microchip and Simulink. C code for the application will be
generated. These blocksets are compatible with the MATLAB
plug-in available in MPLAB IDE. Also provided are many
examples in the form of demo models, including a complete
BLDC motor control application.
相关PDF资料
PDF描述
PIC16F74-E/PT IC MCU FLASH 4KX14 A/D 44TQFP
PIC16LC65B-04/L IC MCU OTP 4KX14 PWM 44PLCC
ALD4213PCL IC SW ANLG QUAD SPST 16PDIP
PIC16F874AT-I/PT IC MCU CMOS 20MHZ 4K FLSH 44TQFP
PIC24FJ256GA110T-I/PT IC PIC MCU FLASH 256K 100TQFP
相关代理商/技术参数
参数描述
dsPIC33FJ16GS504-I/ML 功能描述:数字信号处理器和控制器 - DSP, DSC 16B MCU/DSP 28 LD 40MIPS 16 KB FLASH RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ16GS504-I/PT 功能描述:数字信号处理器和控制器 - DSP, DSC 16B MCU/DSP 40MIPS 16 KB FLASH RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ16GS504-I/TL 功能描述:数字信号处理器和控制器 - DSP, DSC 16Bit MCU/DSP 40MIPS 16KB FL 2KBRM SMPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ16GS504T-50I/ML 功能描述:数字信号处理器和控制器 - DSP, DSC 16B MCU/DSP 50MIPS 16KB FL SMPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
dsPIC33FJ16GS504T-50I/PT 功能描述:数字信号处理器和控制器 - DSP, DSC 16Bit MCU/DSP 50MIPS 16 KB FLASH SMPS RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT