参数资料
型号: DSR2015-7IP
厂商: POWER-ONE INC
元件分类: 电源模块
英文描述: 1-OUTPUT 20 W DC-DC REG PWR SUPPLY MODULE
文件页数: 5/11页
文件大小: 394K
代理商: DSR2015-7IP
Industrial Environment
DC-DC Converters <40 Watt
SR Series
Edition 4/6.99
3/11
MELCHER
The Power Partners.
Functional Description
After passing through a line interference filter, the DC volt-
age is chopped at a constant frequency of about 30 kHz.
After transformer isolation and rectification, an output filter
reduces ripple to a minimum without compromising the dy-
namic behaviour. The output voltage is routed to a control
circuit with internal sense lines, where the output voltage is
compared with a reference voltage. The voltage is regulated
via a control transformer by varying the duty ratio of the for-
ward converter.
The converters have input transient protection by means of
a zinc oxide VDR and input reverse polarity protection by
means of a protective diode and a fuse.
An internal inhibit signal keeps the output voltage switched
off below approx. 0.7...0.9
Ui min.
The outputs are protected against continuous open circuit
by means of an internal, electronically switched pre-load
and against continuous short circuit by the current limiting
circuit.
No output voltage overshoot will occur when plugging in or
disconnecting the module, switching the input voltage on/
off, inhibiting the unit or after reset.
In the event of a main control circuit failure, the maximum
output voltage
Uo is restricted to approx. 1.2 Uo nom by
means of an independent second control circuit.
When the converters are located in free, stationary air at
a temperature
TA max = 71
°C and are operated at nominal
power, the case temperature
TC max will reach approx. 85
°C
after a certain warm-up time (Case temperature
TC at the
measuring point, see:
Mechanical Data).
Under certain operating conditions the ambient tempera-
ture
TA max may be allowed to exceed 71
°C provided that
additional measures are taken to ensure the case tempera-
ture
TC max remains below 85
°C.
Forward
converter
30 kHz
Control circuit
P (option)
i (option)
+
4.7 nF
2.2 nF
+
( )
Input
Filter
2.2 nF
03051
Fig. 1
Block diagram
相关PDF资料
PDF描述
DSR2015-7RIP 1-OUTPUT 20 W DC-DC REG PWR SUPPLY MODULE
DCR012405U/1K 1-OUTPUT 1 W DC-DC REG PWR SUPPLY MODULE
DHC2805S 1-OUTPUT 6 W DC-DC REG PWR SUPPLY MODULE
DM1501-9RD5AFU 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
DM1601-7RD6AFU 1-OUTPUT DC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
DSR220A 功能描述:CONTROL RELAY UNDER VOLT 220VAC RoHS:是 类别:工业控制,仪表 >> 电流/电压监视器 系列:* 其它有关文件:Declaration of Conformity 标准包装:1 系列:*
DSR24A 制造商:Crouzet 功能描述: 制造商:Crydom 功能描述:
DSR24D 功能描述:CONTROL RELAY UNDER VOLT 24VDC RoHS:是 类别:工业控制,仪表 >> 电流/电压监视器 系列:* 其它有关文件:Declaration of Conformity 标准包装:1 系列:*
DSR-25 制造商:SPC Multicomp 功能描述:IDC FLAT CABLE D-SUB CONNECTOR 制造商:SPC Multicomp 功能描述:IDC FLAT CABLE D-SUB CONNECTOR; Series:-; For Use With:IDC D Sub Connectors; D Sub Shell Size:DB; Strain Relief Material:-; Accessory Type:Strain Relief; No. of Contacts:25; No. of Positions:25 ;RoHS Compliant: Yes
DSR3-00 功能描述:线性和开关式电源 3 Slot 3U Rack for DS1300-3 and DS1500-3 RoHS:否 制造商:TDK-Lambda 产品:Switching Supplies 开放式框架/封闭式:Enclosed 输出功率额定值:800 W 输入电压:85 VAC to 265 VAC 输出端数量:1 输出电压(通道 1):20 V 输出电流(通道 1):40 A 商用/医用: 输出电压(通道 2): 输出电流(通道 2): 安装风格:Rack 长度: 宽度: 高度: