- 您现在的位置：买卖IC网 > Datasheet目录621 > DT90000 (Red Lion Controls)5 DIGIT RATE INDIC ADJ .46INCH Datasheet资料下载
参数资料
| 型号： | DT90000 |
| 厂商： | Red Lion Controls |
| 文件页数： | 1/4页 |
| 文件大小： | 0K |
| 描述： | 5 DIGIT RATE INDIC ADJ .46INCH |
| 标准包装： | 1 |
| 系列： | DITAK 9 |
| 计数速率： | 10kHz |
| 数字/字母数： | 5 |
| 输入类型： | 电压 |
| 电源电压： | 不需要（包括电池） |
| 显示器类型： | LCD 无背光 |
| 其它名称： | Q2608465 |
Bulletin No. DT9-C
Drawing No. LP0534
Released 4/07
Tel +1 (717) 767-6511
Fax +1 (717) 764-0839
www.redlion.net
DITAK 9 - ADJUSTABLE TIMEBASE 5-DIGIT RATE INDICATOR
DESIGNED FOR MEDIUM/HIGH SPEED APPLICATIONS
LCD, POSITIVE REFLECTIVE OR NEGATIVE TRANSMISSIVE
WITH YELLOW/GREEN OR RED BACKLIGHTING
0.46 INCH (11.68 mm) HIGH DIGITS
ADJUSTABLE TIMEBASE FROM 1 TO 7 SECONDS
RATE MULTIPLIER FROM 0.0001 TO 1.9999
SELECTABLE DECIMAL POINTS
LITHIUM BATTERY PROVIDES OVER 7 YEARS OF
CONTINUOUS OPERATION (Battery included)
NEMA 4X/IP65 SEALED FRONT PANEL BEZEL
ACCEPTS MAGNETIC OR LOGIC TYPE SIGNAL INPUTS
DESCRIPTION
The DITAK 9 is a self-powered rate indicator designed to operate in
medium/high speed applications. It is ideal for use with magnetic pick-ups or
other bi-polar sensors operating at a minimum of 30 Hz*. The unit features
selectable timebase, rate multiplier, and decimal points via two front panel
pushbuttons. It has a 5-digit LCD Display with 0.46" high digits that are available
in positive image reflective (black digits, reflective background) or negative
image transmissive red or yellow/green (illuminated digits, dark background).
Backlight version units require power from an external 9 to 28 VDC supply.
The unit is constructed of a lightweight, high impact plastic case with a clear
viewing window. The sealed front panel meets NEMA 4X/IP65 specifications
for wash-down and/or dusty environments, when properly installed. A Ditak 9
unit can be mounted in the same panel cut-out as the earlier Ditak 7 units.
The optional Micro Line/Sensor Power Supply (MLPS1000) is designed to
attach to the rear of an installed backlight version Ditak 9. The optional supply
can be powered from an 85 to 250 VAC source, and can provide power for the
backlighting of a unit and a sensor. The maximum current draw for the sensor
is 45 mA.
* - For slow speed applications with low pulse rates, it is recommended to use
the CUB5 Counter/Rate Indicator.
SPECIFICATIONS
1. DISPLAY: 5-Digit LCD, 0.46" (11.68 mm) high digits.
2. POWER SOURCE: Internal 3.0 V lithium battery provides over 7 years of
continuous service (battery life is dependent upon usage).
3. BACKLIGHT POWER REQUIREMENTS: 9 to 28 VDC @ 35 mA.
Above 26 VDC, derate operating temperature to 50°C.
Must use the MLPS or a Class 2 or SELV rated power supply.
4. SIGNAL INPUT: 0 to 10 KHz from a magnetic or bi-polar output (with a
50% duty cycle). Min. input sensitivity is 0.9 V. Max. input = 28 V.
5. TIMEBASE: Adjustable in 1 sec increments via front panel. Timebase
ranges from 1 second to 7 seconds; 0.05% accuracy.
6. CONSTRUCTION: High impact plastic case with clear viewing window
(Panel gasket and mounting clip included). Installation Category I, Pollution
Degree 2.
7. CERTIFICATIONS AND COMPLIANCES:
SAFETY
IEC 1010-1, EN 61010-1: Safety requirements for electrical equipment for
measurement, control, and laboratory use, Part 1.
IP65 Enclosure rating (Face only), IEC 529
Type 4X Enclosure rating (Face only), UL50
ELECTROMAGNETIC COMPATIBILITY
SAFETY SUMMARY
All safety related regulations, local codes and instructions that appear in the
manual or on equipment must be observed to ensure personal safety and to
prevent damage to either the instrument or equipment connected to it. If
equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.
Emissions and Immunity to EN 61326
Electrostatic discharge EN 61000-4-2
Electromagnetic RF fields EN 61000-4-3
Fast transients (burst) EN 61000-4-4
Criterion A
4 kV contact discharge
8 kV air discharge
Criterion A
10 V/m
Criterion A
2 kV power
2 kV signal
CAUTION: Risk of Danger.
Read complete instructions prior to
installation and operation of the unit.
Surge
RF conducted interference
EN 61000-4-5
EN 61000-4-6
Criterion A
2 kV power
1 kV signal
Criterion A
10 V/rms
DIMENSIONS In inches (mm)
Note: Recommended minimum clearance (behind the panel) for
mounting clip installation is 2.15" (54.6) H x 3.00" (76.2) W.
1
相关PDF资料 |
PDF描述 |
|---|---|
| DUR24D | CONTROL RELAY VOLTAGE 24VDC DIN |
| E53-C3D | 0-20 CURRENT OUTPUT ES100 & E5J |
| E5ZE-8ACAD1TCB-V2 DC24 | CONTROLLER TEMP 24V THERMOCOUPLE |
| EFG15G | MODULE DIODE 170A 530VAC |
| EJ-PHDRB | EXTRACTION TOOL PHD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DT900020 | 功能描述:RATE INDICATOR ADJ RED BACKLIGHT RoHS:否 类别:工业控制，仪表 >> 计数器 系列:DITAK 9 其它有关文件:Declaration of Conformity 标准包装:1 系列:99766 计数速率:25Hz 数字/字母数:5 输入类型:机电式脉冲 输出类型:- 电源电压:24V 显示器类型:十进制拨轮 |
| DT-900-3 | 制造商:Nidec-Shimpo America Corporation 功能描述:REPLACEMENT LENS FOR MODEL DT-900 |
| DT900-4 | 制造商:Nidec-Shimpo America Corporation 功能描述:REPLACEMENT HANDLE PAD FOR MODEL DT-900 |
| DT-900-PR | 制造商:Nidec-Shimpo America Corporation 功能描述:STROBOSCOPE, 40FPM TO 12500FPM, 0.01%; Flash Rate Range:40FPM to 12500FPM; Accuracy %:0.01%; Supply Voltage V AC:115V; Flash Rate Max (FPM):12500; Stroboscope Features:Phase Shift and Rate Multiplier/Divider ;RoHS Compliant: NA |
| DT9150 | 制造商:未知厂家 制造商全称:未知厂家 功能描述:Interface Daughter Card |
发布紧急采购，3分钟左右您将得到回复。