Pb
RoHS
EB13C5G1H-14.7456M TR
EB13C5 G 1 H -14.7456M TR
Series
RoHS Compliant (Pb-free) Low Current 3.3V 4 Pad
3.2mm x 5mm Ceramic SMD LVCMOS Oscillator
Frequency Tolerance/Stability
±100ppm over -40°C to +85°C
Duty Cycle
50 ±10%
Packaging Options
Tape & Reel
Nominal Frequency
14.7456MHz
Logic Control / Additional Output
Tri-State
ELECTRICAL SPECIFICATIONS
Nominal Frequency
14.7456MHz
Frequency Tolerance/Stability
±100ppm over -40°C to +85°C (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency
Stability over the Operating Temperature Range, Supply Voltage Change, Ouput Load Change, First Year
Aging at 25°C, Shock, and Vibration)
Supply Voltage
3.3Vdc ±10%
Input Current
3mA Maximum
Output Voltage Logic High (Voh)
90% of Vdd Minimum (IOH = -4mA)
Output Voltage Logic Low (Vol)
10% of Vdd Maximum (IOL = +4mA)
Rise/Fall Time
6nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle
50 ±10% (Measured at 50% of waveform)
Load Drive Capability
15pF Maximum
Output Logic Type
CMOS
Logic Control / Additional Output
Tri-State
Tri-State Input Voltage (Vih and Vil)
90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High
Impedance)
Standby Current
10A Maximum (Disabled Output: High Impedance)
RMS Phase Jitter
1pSec Maximum (12kHz to 20MHz offset frequency)
Period Jitter (Deterministic)
0.2pSec Typical, 3pSec Maximum
Period Jitter (Random)
2pSec Typical, 5pSec Maximum
Period Jitter (RMS)
3pSec Typical, 7pSec Maximum
Period Jitter (pk-pk)
40pSec Typical, 100pSec Maximum
Start Up Time
10mSec Maximum
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
Flammability
UL94-V0
Gross Leak Test
MIL-STD-883, Method 1014, Condition C
Mechanical Shock
MIL-STD-883, Method 2002, Condition B
Moisture Resistance
MIL-STD-883, Method 1004
Moisture Sensitivity
J-STD-020, MSL 1
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Resistance to Solvents
MIL-STD-202, Method 215
Solderability
MIL-STD-883, Method 2003
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Vibration
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev B 3/11/2011 | Page 1 of 6