PART NUMBERING GUIDE

MECHANICAL DIMENSIONS

ALL DIMENSIONS IN MILLIMETERS

MARKING SPECIFICATIONS

ENVIRONMENTAL/MECHANICAL SPECIFICATIONS

Seal Integrity

Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum.

Solderability

Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage.

Marking Permanency

10 Strokes with brush after 1 minute soak in solvent, 3 times.

Shock

Random drop on hard wooden plate 3 times from a height of 50cm.

Vibration

Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz

within 1 minute (approximately) for 2 hours minimum on each axis (X,Y

and Z) for a total of 6 hours.

Line 1: ECLIPTEK

Line 2: XX.XXXM

Frequency in MHz (5 Digits Maximum + Decimal)

Line 3: XX

Ecliptek Manufacturing Identifier

Blank=±50ppm at 25°C, ±100ppm from 0°C to 70°C

A=±50ppm at 25°C, ±100ppm from -20°C to 70°C

B=±50ppm at 25°C, ±100ppm from -40°C to 85°C

C=±30ppm at 25°C, ±50ppm from 0°C to 70°C

D=±30ppm at 25°C, ±50ppm from -20°C to 70°C

E=±30ppm at 25°C, ±50ppm from -40°C to 85°C

F=±15ppm at 25°C, ±30ppm from 0°C to 70°C

G=±15ppm at 25°C, ±30ppm from -20°C to 70°C

H=±15ppm at 25°C, ±30ppm from -40°C to 85°C

J=±10ppm at 25°C, ±30ppm from 0°C to 70°C

K=±10ppm at 25°C, ±30ppm from -20°C to 70°C

L=±10ppm at 25°C, ±30ppm from -40°C to 85°C

Blank=18pF (Standard)

S=Series, XX=XXpF (Custom)

MANUFACTURER

CATEGORY

SERIES

PACKAGE

CLASS

REV

ECLIPTEK CORP.

CRYSTAL

EC7

UM-1

CR36

08/02

800-ECLIPTEK www.ecliptek.com for latest revision

NOTES

__________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________